Assessment of the influence of porosity on the mechanical characteristics of thick-walled carbon fiber parts produced by vacuum infusion
https://doi.org/10.35164/0554-2901-2023-11-12-54-56
Abstract
In this paper, the effect of macropores on the mechanical characteristics during compression of thick-walled carbon fiber parts obtained by vacuum infusion has been studied. The mechanism of destruction of thick-walled carbon fiber reinforced plastic with a pore content of more than 1% under compression has been determined.
About the Authors
V. V. Sokolov
Kronshtadt JSC
Russian Federation
Russian Federation
Moscow
A. M. Gulyaev
Kronshtadt JSC
Russian Federation
Russian Federation
Moscow
S. I. Voinov
Kronshtadt JSC
Russian Federation
Russian Federation
Moscow
P. Yu. Antipov
Kronshtadt JSC
Russian Federation
Russian Federation
Moscow
O. A. Golishev
Kronshtadt JSC
Russian Federation
Russian Federation
Moscow
S. V. Dolinsky
Kronshtadt JSC
Russian Federation
Russian Federation
Moscow
References
1. M. Mehdikhani, L. Gorbatikh, I. Verpoest, S. Lomov. Voids in fiber-reinforced polymer composites: A review on their formation, characteristics, and effects on mechanical performance // Journal of Composite Materials. – 2019. – Vol. 53(12). – Р. 1579–1669.
2. J. Sébastien Leclerc, E. Ruiz. Porosity reduction using optimized flow velocity in Resin Transfer Molding // Composites: Part A. – 2008. - №39. – Р. 1859 – 1868.
3. М.И. Душин, К.И. Донецкий, Р.Ю. Караваев, И.А. Коротков. Некоторые особенности жидкостного формования полимерных композиционных материалов (обзор) // Труды ВИАМ. – 2017. - №2 (50). – С. 54–64.
4. S.M. Sisodia, S.C. Garcea, A.R. George, D.T. Fullwood, S.M. Spearing, E.K. Gamstedt. High-resolution computed tomography in resin infused woven carbon fibre composites with voids // Composites Science and Technology. – 2016. - №131. – Р. 12–21.
5. Xueshu L., F. Chen. Review of Void Formation and its Effects on the Mechanical Performance of Carbon Fiber Reinforced Plastic // ENGINEERING TRANSACTIONS. – 2016. - 64(1). – Р. 33–51.
6. А.С. Бойчук, В.Ю. Чертищев, И.А. Диков, А.С. Генералов. Оценка возможности определения пористости в углепластике ультразвуковым теневым методом // Труды ВИАМ. – 2017. – №7 (55). – С. 102–109.
7. J.A. D’haen, M. May, C. Boegle, S. Hiermaier. Damage Evolution Analysis on Compression-Loaded Multidirectional Carbon Fiber Laminates Using Ex-Situ CT Scans // J. Compos. Sci. – 2022. – №6, 63. – P. 1–7.
Review
For citations:
Sokolov V.V., Gulyaev A.M., Voinov S.I., Antipov P.Yu., Golishev O.A., Dolinsky S.V. Assessment of the influence of porosity on the mechanical characteristics of thick-walled carbon fiber parts produced by vacuum infusion. Plasticheskie massy. 2023;(11-12):54-56. (In Russ.) https://doi.org/10.35164/0554-2901-2023-11-12-54-56
Views:
182
Email this article 
