The effect of the composition of the hydrocarbon mixture on the transfer in thermoplastic polyurethanes
https://doi.org/10.35164/0554-2901-2022-11-12-33-35
Abstract
The transfer of mixtures of hexane and toluene in thermoplastic polyurethanes used in the production of tanks for temporary storage and transportation of liquid fuels has been investigated. The standard methodology for estimating the diffusion permeability of polymers is not the basis for modeling the natural loss of fuels during storage. A model for estimating natural loss is proposed, the equations of which describe the linear dependences of the decrease in the mass of fuels in tanks in the coordinate of a conditional time equal to the square root of time. The efficiency of the proposed model depends on the composition of the hexane-toluene mixture, since the composition of the mixture affects the limiting stage of the process, which determines the dependence of the natural loss either on the diffusion rate of the fuel in the tank shell, or on the volatilization of the released fuel from the outer surface of the tank.
About the Authors
Yu. N. RybakovRussian Federation
Moscow
A. V. Dedov
Russian Federation
Moscow
D. V. Kolotilin
Russian Federation
Moscow
R. I. Kunnap
Russian Federation
Moscow
References
1. Рыбаков Ю.Н., Ванчугов Н.А. Применение эластичных резервуаров на объектах топливозаправочного комплекса авиатопливообеспечения // Научный вестник МГТУ ГА. 2012. №183. С. 173–175.
2. Рыбаков Ю.Н. Вклад в теорию и практику химмотологии в области создания полевых средств хранения горючего // Химия и технология топлив и масел. 2014. №5. С. 23–26.
3. Иванов А.В., Рыбаков Ю.Н. Хранение и транспорт горючего с использованием эластичных резервуаров // Зарубежное военное обозрение. 2015. №8. С. 54–57.
4. Рыбаков Ю.Н., Волгин С.Н., Ларионов С.В., Дедов А.В. Прогнозирование кинетики потерь топлива при хранении в полимерных резервуарах // Наука и технология трубопроводного транспорта нефти и нефтепродуктов. 2018. Т. 8. №2. С. 143–145.
5. Асметков И.Д., Колотилин Д.В., Дедов А.В. Проницаемость термопластичного полиуретана для резервуаров хранения топлива // Пластические массы. 2018. №5–6. С. 48–50.
6. Рыбаков Ю.Н., Дедов А.В., Ларионов С.В. Проницаемость полимерных материалов для технических средств хранения нефтепродуктов // Наука и технология трубопроводного транспорта нефти и нефтепродуктов. 2019. Т. 9. №4. С. 440–443.
7. Дедов А.В., Колотилин Д.В., Кюннап Р.И. Методика оценки герметичности полимерных резервуаров для перевозки топлива воздушным транспортом // Пластические массы. 2021. №1–2. С. 46–48.
8. Малкин А.Я., Чалых А.Е. Диффузия и вязкость полимеров: Методы измерения. М.: Химия. 1979.
9. Манин В.Н., Громов А.Н. Физико-химическая стойкость полимерных материалов в условиях эксплуатации // – М.: Химия. 1980, 248 с.
10. Чалых А.Е. Диффузия в полимерных системах. М.: Химия. 1987. 312 с.
11. Москалев П.В., Шитов В.В. Математическое моделирование пористых структур // – М.: МАИК Наука/Интерпериодика. 2007. – 114 с.
Review
For citations:
Rybakov Yu.N., Dedov A.V., Kolotilin D.V., Kunnap R.I. The effect of the composition of the hydrocarbon mixture on the transfer in thermoplastic polyurethanes. Plasticheskie massy. 2022;(11-12):33-35. (In Russ.) https://doi.org/10.35164/0554-2901-2022-11-12-33-35