Development and properties of aluminium-filled polyethyleneterephthalate-glycol
https://doi.org/10.35164/0554-2901-2021-3-4-42-45
Abstract
The properties and processing by injection molding and 3D printing of polyethylene terephthalate glycol (PET-G) filled with aluminum powder are investigated. The introduction of up to 5 vol.% of aluminum into the thermoplastic makes it possible to obtain a thermoplastic composite with a metal-like appearance, high mechanical properties and improved performance.
About the Authors
I. M. Obidin
A.V.Topchiev Institute of Petrochemical Synthesis Russian Academy of Sciences; D.Mendeleev University of Chemical Technology of Russia
Russian Federation
Russian Federation
S. V. Kotomin
A.V.Topchiev Institute of Petrochemical Synthesis Russian Academy of Sciences; Bauman Moscow State Technical University
Russian Federation
Russian Federation
References
1. Safety data sheet [Электронный ресурс]: SDS Number:YS3D116003 / ShenzhenEsunIndustrialCo., Ltd. – Shenzhen, China: 2017. - // URL: http://www.esun3d.net/UploadFiles/Download/MSDS_eSUN%E6%98%93%E7%94%9F_%20eAl-fill%20%EF%BC%88%E9%93%9D%EF%BC%89%E7%BA%BF%E6%9D%90.pdf (дата обращения: 08.12.2020).
2. Шевлик Н.В., Строгонова С.С., Тычинская Л.Ю., Коваль В.Н., Щербина Л.А. Синтез и свойства аморфного светопрозрачного С-ПЭТ [Текст]//Полимерные материалы и технологии. – 2016. - №3. Т. 2 – С. 35-46.
3. Turner, S.R. Amorpous and crystalline polyesters based on 1, 4-cyclohexanenedimethanol / S.R. Turner., R.W. Seymour, J.R. Dombroski // Modern Polyesters: Chemistry and Technology of Polyesters and Copolyesters / ed. J. Scheirs, T.E. Long – John Wiley and Sons, Ltd., 2003. – P. 267-292.
4. Adumitroaie A. Novel Continuous Fiber Bi-Matrix Composite 3D Printing Technology / Adumitroaie A., Antonov F., Khaziev A., Azarov A., Golubev M., Vasiliev V. // Materials 2019, 12, 3011; doi:10.3390/ma12183011.
5. Product presentation [Электронный ресурс]: 3D printing filament / Shenzhen Esun Industrial Co., Ltd. – Shenzhen, China: 2016 . - // URL: https://www.intservo.com/pages/about-us (дата обращения: 08.12.2020).
6. Physical properties of PETG [Электронный ресурс]: CAS Number: 25640-14-6// URL: https://www.filaments.directory/en/plastics/petg (дата обращения: 08.12.2020).
Review
For citations:
Obidin I.M., Kotomin S.V. Development and properties of aluminium-filled polyethyleneterephthalate-glycol. Plasticheskie massy. 2021;(3-4):42-45. (In Russ.) https://doi.org/10.35164/0554-2901-2021-3-4-42-45
Views:
392
Email this article 
