Influence of processing aids on properties of glass reinforced composites based on polyamide 1010
https://doi.org/10.35164/0554-2901-2016-5-6-43-48
Abstract
In current article the influence of processing aids of lubricant type on glass fiber breakage during extrusion, and changing properties of glass fiber reinforced composites based on polyamide 1010 were studied.
About the Authors
A. A. Nikiforov
Kazan National Research Technological University
Russian Federation
Russian Federation
S. I. Volfson
Kazan National Research Technological University
Russian Federation
Russian Federation
N. A. Okhotina
Kazan National Research Technological University
Russian Federation
Russian Federation
R. .. Rinberg
Technische Universität Chemnitz
Russian Federation
Russian Federation
L. .. Kroll
Technische Universität Chemnitz
Russian Federation
Russian Federation
References
1. Нелсон У.Е. Технология пластмасс на основе полиамидов. Пер. с англ. под ред. А.Я. Малкина. - М.: Химия, 1979. - 256 с.
2. Faruk O. et al. Biocomposites reinforced with natural fibers: 2000-2010 // Progress in Polymer Science. - 2012. - T.37. - №11. - c. 1552-1596.
3. Gesner B.D. Encyclopedia of Polymer Science and Technology, Vol.10 // Interscience, New York. - 1969. - c.695.
4. Yang J. et al. Cristallization and crosslinking of polyamide-1010 under elevated pressure // Journal of applied polymer science. - 2002. - T.83. - №12. - c.2522-2527.
5. Kuciel S., Kozniar P., Liber-Knec A. Polyamides from renewable sources as matrices of short fiber reinforced biocomposites. // Polymery. - 2012. - T.57. - №(. c.627-634.
6. Feldmann M., Bledzki A.K. Bio-based polyamides reinforced with cellulosic fibres - processing and properties. // Composites Science and Technology. - 2014. - T.100. C.113-120.
7. Zhang S.L. et al. Impact properties, phase structure, compatibility, and fracture morphology of polyamide-1010/thermoplastic poly(ester urethane) elastomer blends // Journal of Polymer Science Part B: Polymer Physics. - 2005. - T.43. - №10. - c. 1177-1185.
8. Кербер М.Л. и др. Полимерные композиционные материалы: структура, свойства, технология. Под ред. А.А. Берлина. - СПб.: Профессия, 2008. - 560 с.
9. Thomason J.L. Structure-property relationships in glass-reinforced polyamide, part 1: The effects of fiber content // Polymer composites. - 2006. - T.27. - №5. - c.552-562.
Review
For citations:
Nikiforov A.A., Volfson S.I., Okhotina N.A., Rinberg R..., Kroll L... Influence of processing aids on properties of glass reinforced composites based on polyamide 1010. Plasticheskie massy. 2016;(5-6):43-48. (In Russ.) https://doi.org/10.35164/0554-2901-2016-5-6-43-48
Views:
420
Email this article 
