Preview

Plasticheskie massy

Advanced search

Проектирование композиционных материалов с заданной структурой и свойствами

https://doi.org/10.35164/0554-2901-2016-5-6-15-16

Abstract

The determination of the structure and properties of composite materials (basalt-plastic) carried out reinforced with randomly spaced discrete fibers at the design stage taking into account the diameter of the fibers , the critical length of fibers, their location inside the matrix and the distribution of stresses along the length of the fibers. The results of the calculation were used here by making samples of thermoplastic polymeric materials by the developed technology. The results of experimental studies of samples of thermoplastic material have shown that the calculated values of the properties of the composite are slightly different from the experimental ones.

About the Authors

Л. Коротеева
МГУДТ
Russian Federation


А. Шаронов
ООО «Суперпласт»
Russian Federation


П. Астахов
ООО «Суперпласт»
Russian Federation


Н. Миронов
ООО «Суперпласт»
Russian Federation


А. Сергеева
МГУДТ
Russian Federation


References

1. Шульга А.В. Композиты. Ч.1. Основы материаловедения композитных материалов. - М.: НИЯУ МИФИ, 2013. 96с.

2. Панова Л.Г. Наполнители для полимерных композиционных материалов: учеб. пособие. - Саратов.: Саратовский государственный университет, 2010. 68с.

3. Перепелкин К.Е. Армирующие волокна и волокнистые полимерные композиты /К.Е.Перепелкин НОТ, 2009. 379с.

4. Полимерные композитные материалы. Свойства, структура, технология. /Под. ред. Берлина А.А. СПб.: Профессия, 2009. 560с.


Review

For citations:


 ,  ,  ,  ,   . Plasticheskie massy. 2016;(5-6):15-16. (In Russ.) https://doi.org/10.35164/0554-2901-2016-5-6-15-16

Views: 434


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 0554-2901 (Print)