Elastic conductive polymeric materials on based syndiotactic 1,2-polybutadiene for 3D printing
https://doi.org/10.35164/0554-2901-2018-3-4-49-52
Abstract
The possibility of using syndiotactic 1,2-polybutadiene as a polymer base for the production of electrically conductive polymeric materials for 3D printing is shown. The influence of the nature and content of the plasticizer on the electrically conductive properties of polymer materials is determined.
About the Authors
A. Glazyrin
Bashkir State University
Russian Federation
Russian Federation
A. Basyrov
LLC “Unimatech”
Russian Federation
Russian Federation
A. Gadeev
Bashkir State University
Russian Federation
Russian Federation
N. Koltaev
Bashkir State University
Russian Federation
Russian Federation
R. Nagaev
Bashkir State University
Russian Federation
Russian Federation
A. Nikolaeva
Bashkir State University
Russian Federation
Russian Federation
References
1. Ilievski, F., Mazzeo, A.D., Shepherd, R.F., Chen, X. &Whitesides, G.M. Soft robotics for chemists. Angew. Chem. Int. Edn Engl. 50, 1890-1895 (2011).
2. Bauer, S. et al. 25th anniversary article: A soft future: From robots and sensor skin to energy harvesters. Adv. Mater. 26, 149-162 (2014).
3. Rus, D. &Tolley, M. T. Design, fabrication and control of soft robots. Nature 521, 467-475 (2015).
4. Yamada, T. et al. A stretchable carbon nanotube strain sensor for human-motion detection. Nature Nanotechnol. 6, 296-301 (2011).
5. Lu, N., Lu, C., Yang, S. & Rogers, J. Highly sensitive skin-mountable strain gauges based entirely on elastomers. Adv. Funct. Mater. 22, 4044-4050 (2012)
6. Muth, J. T. et al. Embedded 3D printing of strain sensors within highly stretchable elastomers. Adv. Mater. 26, 6307-6312 (2014). The paper details a method to create soft strain sensors embedded in elastomeric matrices.
7. Глазырин А.Б.,Абдуллин М.И., Басыров А.А., Колтаев Н.В. //Электропроводящие полимерные материалы для 3D-печати// Научный журнал «Вестник Башкирского университета». Т.21 - 2016 №1. Стр 81-85
8. Глазырин А. Б, Басыров А. А., Гадеев А. С. и др. / Реологические свойства пластифицированных угленаполненных полимерных материалов на основе синдиотактического 1,2-ПБ. / Проблемы современной науки и образования. Ноябрь 2016г.
9. Глазырин А.Б., Басыров А.А., Колтаев Н.В., Николаева А.А., Нургалеев И.И.// Электрические свойства угленаполненных полимерных композиций для 3D-печати// Актуальные проблемы гуманитарных и естественных наук.
Review
For citations:
Glazyrin A., Basyrov A., Gadeev A., Koltaev N., Nagaev R., Nikolaeva A. Elastic conductive polymeric materials on based syndiotactic 1,2-polybutadiene for 3D printing. Plasticheskie massy. 2018;(3-4):49-52. (In Russ.) https://doi.org/10.35164/0554-2901-2018-3-4-49-52
Views:
348
Email this article 
