Influence of technological factors on the dimensional stability of products made of fluoroplastic and composites based on it
https://doi.org/10.35164/0554-2901-2018-3-4-26-29
Abstract
Factors determining the dimensional accuracy of products made of PTFE and composite materials based on it are investigated. Technological methods aimed at increasing the accuracy of manufacturing blanks and reducing waste in the manufacture of seals made of fluoroplastic composites are proposed.
About the Authors
K. Yu. Zershchikov
LLC "Constanta-2"
Russian Federation
Russian Federation
A. N. Gaidadin
Volgograd state technical university
Russian Federation
Russian Federation
References
1. Пугачев А.К., Росляков О.А. Переработка фторопластов в изделия: Технология и оборудование.- Л.: Химия, 1987.-168с.
2. Влияние размеров, формы и содержания наполнителей на структуру дисперсно-наполненных фторопластовых композиционных материалов, Зерщиков К.Ю., Семенов Ю.В. Конструкции из композиционных материалов, №2, 2014,с.55-60.
3. Influence of Ageing on Sealability of Elastomeric O-Rings, Anja Kömmling, Matthias Jaunich, Payam Pourmand, Dietmar Wolff and Ulf W. Gedde, Version of Record online: 22 JUN 2017 | DOI: 10.1002/masy.201600157
Review
For citations:
Zershchikov K.Yu., Gaidadin A.N. Influence of technological factors on the dimensional stability of products made of fluoroplastic and composites based on it. Plasticheskie massy. 2018;(3-4):26-29. (In Russ.) https://doi.org/10.35164/0554-2901-2018-3-4-26-29
Views:
411
Email this article 
