Filing the polyetheretherketone (PEEK) as a way of composites of high performance
https://doi.org/10.35164/0554-2901-2017-5-6-6-9
Abstract
Aromatic polyetheretherketones refer to those polymers whose production capacity is currently growing rapidly, due to a whole set of important performance properties of these polymers. This paper examines some of the technological characteristics of composites based on polyetheretherketones.
About the Authors
A. K. Mikitaev
Kabardino-Balkarian State University
Russian Federation
Russian Federation
A. H. Salamov
Kabardino-Balkarian State University
Russian Federation
Russian Federation
A. A. Beev
Kabardino-Balkarian State University
Russian Federation
Russian Federation
D. A. Beeva
Kabardino-Balkarian State University
Russian Federation
Russian Federation
References
1. Lee G., Parter R.S. Polymer Engng. Sci, 1986, v. 26, No 9, p. 633.
2. Small R.W.H. Europ. Polymer J., 1986, v. 22, No 9, p. 699.
3. Wakelyn N.T.-G. Polymer Sci. Polymer Chem. End., 1986, v. 24, No 9, p. 2101.
4. Cebe P. Polymer Comp., 1888, v. 9, No 4, p. 271.
5. Mingbi Q. e.a. Thermochim. Acta, 1988, v. 134, p. 223.
6. Mingbi Q. e.a. Acta Polymer Sin., 1989, No 3, p. 257.
7. Wang W. e.a. Acta Polymer Sin., 1989, No 3, p. 337.
8. Wang W. e.a. Acta Polymer Sin., 1989, No 3, p. 330.
9. Chem/ Ind. Jap., 1988, v. 39, No 12, p.1044.
10. Talbott M.F. e.a. J. Comp. Mat., 1987, v. 21, No 11, p. 1057.
11. Wang Q., Springer G., J. Comp. Mat., 1989, v. 23, No 5, p. 434.
12. Friedrich K. e.a. Composites (Gr. Brit.), 1986, v. 17, No 3, p. 205.
13. Karger-Kocsis G., Friedrich K. Plast. Rubb. Proc. Appl., 1987, v. 8, No 2, p. 91.
14. Chou Hsin Nan. 18 th Int. SAMPE Techn. Conf. Seattle, Wash., 1986. Covina, Calif. 1986, v. 18, p. 970.
15. Reilly I.I. e.a. Ibid, p.22.
16. Karger-Kocsis G. e.a. J. Polymer Engng., 1988, v. 8, No 3-4, p. 221.
17. Adv. Comp. Bull., 1990, april, p. 5.
18. Crick R.A. e.a. J. Mat Sci., 1987, v. 22, Mo 6, p. 2094.
19. Tung C.M., Dynes P.G. J. Appl. Polymer Sci., 1987, v. 33, No 2, p. 505.
20. Shukla G.G., Sichina W.G. Antec. 84Plast. World Econ. 42ndTechn. Conf. and Exhib. New Orleans, 1984. Conf. Proc. Brookfield, Conn., 1984. p. 265.
21. Mijovic J., Gsell T.C. SAMPE QUART., 1990, v. 21, p. 42.
22. Ko F. e.a. Mater - Pathway Future: 33rd Int. SAMPE. Symp. andExhib. Anaheim, Calif., 1988. Covina, Calif. 1988, p. 899.
23. Turner F.M. Cogswell F.N. 18 th Int. SAMPE Techn. Conf. Seattle, Wash., 1986. Covina, Calif. 1986, v. 18, p. 32.
24. Crosby J.M. e.a. 19 th Int. SAMPE Techn. Conf. Crystaly City, 1987. Covina, Calif. 1987, v. 19, p. 476.
25. Maguire D.M. Sampe J., 1989, v. 25, No 1, p. 11.
26. Maffezzoli A.M. Sampe J., 1989, v. 25, No 1, p. 35.
27. Mach. Des., 1988, v. 60, No 5, p. 144.
28. Pritchard G., Kandles S.J. 16th KeinforcedPlast. Congr. Blackpool, 1988. London, 1988, p. 73.
29. Lhymn C. Adv. Polymer Techn., 1986, v. 6, No 2, p. 203.
30. Lhymn C. Wear, 1987, v. 114, No 2, p. 223.
31. Lhymn C. ASLE Trans., 1987, v. 30, No 3, p. 324.
32. Lhymn C., Lhymn I.O. Adv. Polymer. 1988, v. 8, No 4, p. 417.
33. Briscol D.J. e.a. Wear, 1986, v. 108, No 4, p. 357.
34. Заявка Великобритании 2136439А.
35. Tanaka Ch. High Polymer Jap., 1989, v. 38, No 9, p. 890.
36. Японская заявка 60-44551.
37. Baeklund J. Rapp. Ingenjoersvetenskapsakal, 1986, No 302, p. 103.
38. Sham Chi e.a. Polymer, 1988, v. 29. No 6, p. 1016.
39. Guo Q. e.a. Polymer Bull., 1988, v. 29. No 6, p. 517.
40. Plastverarbeiter, 1987, Bd. 38, No 5, S. 46.
41. Habcox N.L., Phillips D.C. Proc. 2nd Conf. Mater. End., London, 1985, p. 139.
42. Griffiths G.R. e.a. Mater - Pathway Future: 33rd Int. SAMPE. Symp. andExhib. Anaheim, Calif., 1988. Covina, Calif. 1988, p. 308.
43. Cogswell F.N. 28th Nat. SAMPE. Symp. andExhib. Anaheim, Calif., 1983. Azusa, Calif. 1983, v. 28, p. 528.
44. Dickson R.F. e.a. J. Mat. Sci, 1985, v. 20, No 1, p. 60.
45. Hartness J.T., Kim R.J. 28th Nat. SAMPE. Symp. andExhib. Anaheim, Calif., 1983. Azusa, Calif. 1983, v. 28, p. 535.
46. Заявка ФРГ 3425960.
47. Cervenka A. Polymer Comp., 1988, v. 9, No 4, p. 263.
48. Curtis D.C. e.a. Composites (Gr. Brit.), 1988, v. 19, No 6, p. 446.
49. Jaconis J.M. Adv. Mat. Techn., 1987: 32nd Int. SAMPE. Symp. andExhib. Anaheim, Calif., 1987. Covina, Calif. 1987, p. 104.
50. Majidi A.P. e.a. 19 th Int. SAMPE Techn. Conf. Crystaly City, 1987. Covina, Calif. 1987, v. 19, p. 576.
51. Grove S.M., Short D. Plast. Rubb. Proc. Appl., 1988, v. 10, No 1, p. 34.
52. Elsenussi A.K. Composites (Gr. Brit.), 1989, v. 20, No 3, p. 249.
53. Заявка ФРГ 3702929.
54. Adaleman R.L. e.a. 13th Reinforced Plast. Congr. Brighton, 1982. London, 1982, p. 71.
55. Isikava T. e.a. J. Soc. Comp. Mat., 1986, v. 12, No 1, p. 8.
56. Dreumel W.H.M. Composites, 1986, v. 26, No 3, p. 132.
57. Barnes J.A., Cogswell F.N. SAMPE Qurt., 1989, v. 20, No 3, p. 22.
58. Lee R.J. Composites, 1987, v. 18, No 1, p. 35.
59. Morton J., Godwin E.W. Compos. Struct., 1989, v. 13, No 1, p. 1.
60. Chan C.-M., Venkatraman S. Polymer Sci., Polymer Phys., 1987, v. B25, No 8, p. 1665.
61. Venkatraman S., Chan C.-M. Am. Chem. Soc. Polymer Preps., 1986, v. 27, No 1, p. 305.
62. Chan C.-M., Venkatraman S. J. Appl. Polymer Sci., 1986, v. 32, No 7, p. 5933.
63. Chang I.I. Mater - Pathway Future: 33rd Int. SAMPE. Symp. andExhib. Anaheim, Calif., 1988. Covina, Calif. 1988, p. 194.
64. Адаменко Н.А., Казуров А.В., Зерщиков К.Ю., Седов Э.В. Исследование влияния наполнителя на термомеханические свойства полиэфирэфиркетона. - Известия Волгоградского государственного технического университета. Т.4, № 4, 2010.
Review
For citations:
Mikitaev A.K., Salamov A.H., Beev A.A., Beeva D.A. Filing the polyetheretherketone (PEEK) as a way of composites of high performance. Plasticheskie massy. 2017;(5-6):6-9. (In Russ.) https://doi.org/10.35164/0554-2901-2017-5-6-6-9
Views:
480
Email this article 
