plasticnewsПластические массыPlasticheskie massy0554-2901PLASTMASSY Publishing House (Moscow)10.35164/0554-2901-2017-5-6-6-9plasticnews-165Research ArticleСтатьиНаполнение полиэфирэфиркетонов (ПЭЭК) как способ получения композитов с высокими эксплуатационными свойствамиFiling the polyetheretherketone (PEEK) as a way of composites of high performanceМикитаевА. К.MikitaevA. K.noemail@neicon.ruСаламовА. Х.SalamovA. H.noemail@neicon.ruБеевА. А.BeevA. A.noemail@neicon.ruБееваД. А.BeevaD. A.noemail@neicon.ruКабардино-Балкарский госуниверситет им. Х.М. БербековаРоссияKabardino-Balkarian State UniversityRussian Federation20170506201905-669Copyright © Микитаев А.К., Саламов А.Х., Беев А.А., Беева Д.А., 20192019Микитаев А.К., Саламов А.Х., Беев А.А., Беева Д.А.Mikitaev A.K., Salamov A.H., Beev A.A., Beeva D.A.Данная работа распространяется под лицензией Creative Commons Attribution 4.0.This work is licensed under a Creative Commons Attribution 4.0 License.https://www.plastics-news.ru/jour/article/view/165

Ароматические полиэфирэфиркетоны относятся к тем полимерам, чей объем производства в настоящее время возрастает быстрыми темпами, что связано с целым комплексом важных эксплуатационных свойств этих полимеров. В данной работе рассматриваются некоторые технологические характеристики композитов на основе полиэфирэфиркетонов.

Aromatic polyetheretherketones refer to those polymers whose production capacity is currently growing rapidly, due to a whole set of important performance properties of these polymers. This paper examines some of the technological characteristics of composites based on polyetheretherketones.

полиэфирэфиркетонтемпература стеклованиякомпозиционные материалысвойства композицийpolyetheretherketonethe glass transition temperaturecomposite materialsthe properties of the compositionsReferencesLee G., Parter R.S. Polymer Engng. Sci, 1986, v. 26, No 9, p. 633.Lee G., Parter R.S. Polymer Engng. Sci, 1986, v. 26, No 9, p. 633.Small R.W.H. Europ. Polymer J., 1986, v. 22, No 9, p. 699.Small R.W.H. Europ. Polymer J., 1986, v. 22, No 9, p. 699.Wakelyn N.T.-G. Polymer Sci. Polymer Chem. End., 1986, v. 24, No 9, p. 2101.Wakelyn N.T.-G. Polymer Sci. Polymer Chem. End., 1986, v. 24, No 9, p. 2101.Cebe P. Polymer Comp., 1888, v. 9, No 4, p. 271.Cebe P. Polymer Comp., 1888, v. 9, No 4, p. 271.Mingbi Q. e.a. Thermochim. Acta, 1988, v. 134, p. 223.Mingbi Q. e.a. Thermochim. Acta, 1988, v. 134, p. 223.Mingbi Q. e.a. Acta Polymer Sin., 1989, No 3, p. 257.Mingbi Q. e.a. Acta Polymer Sin., 1989, No 3, p. 257.Wang W. e.a. Acta Polymer Sin., 1989, No 3, p. 337.Wang W. e.a. Acta Polymer Sin., 1989, No 3, p. 337.Wang W. e.a. Acta Polymer Sin., 1989, No 3, p. 330.Wang W. e.a. Acta Polymer Sin., 1989, No 3, p. 330.Chem/ Ind. Jap., 1988, v. 39, No 12, p.1044.Chem/ Ind. Jap., 1988, v. 39, No 12, p.1044.Talbott M.F. e.a. J. Comp. Mat., 1987, v. 21, No 11, p. 1057.Talbott M.F. e.a. J. Comp. Mat., 1987, v. 21, No 11, p. 1057.Wang Q., Springer G., J. Comp. Mat., 1989, v. 23, No 5, p. 434.Wang Q., Springer G., J. Comp. Mat., 1989, v. 23, No 5, p. 434.Friedrich K. e.a. Composites (Gr. Brit.), 1986, v. 17, No 3, p. 205.Friedrich K. e.a. Composites (Gr. Brit.), 1986, v. 17, No 3, p. 205.Karger-Kocsis G., Friedrich K. Plast. Rubb. Proc. Appl., 1987, v. 8, No 2, p. 91.Karger-Kocsis G., Friedrich K. Plast. Rubb. Proc. Appl., 1987, v. 8, No 2, p. 91.Chou Hsin Nan. 18 th Int. SAMPE Techn. Conf. Seattle, Wash., 1986. Covina, Calif. 1986, v. 18, p. 970.Chou Hsin Nan. 18 th Int. SAMPE Techn. Conf. Seattle, Wash., 1986. Covina, Calif. 1986, v. 18, p. 970.Reilly I.I. e.a. Ibid, p.22.Reilly I.I. e.a. Ibid, p.22.Karger-Kocsis G. e.a. J. Polymer Engng., 1988, v. 8, No 3-4, p. 221.Karger-Kocsis G. e.a. J. Polymer Engng., 1988, v. 8, No 3-4, p. 221.Adv. Comp. Bull., 1990, april, p. 5.Adv. Comp. Bull., 1990, april, p. 5.Crick R.A. e.a. J. Mat Sci., 1987, v. 22, Mo 6, p. 2094.Crick R.A. e.a. J. Mat Sci., 1987, v. 22, Mo 6, p. 2094.Tung C.M., Dynes P.G. J. Appl. Polymer Sci., 1987, v. 33, No 2, p. 505.Tung C.M., Dynes P.G. J. Appl. Polymer Sci., 1987, v. 33, No 2, p. 505.Shukla G.G., Sichina W.G. Antec. 84Plast. World Econ. 42ndTechn. Conf. and Exhib. New Orleans, 1984. Conf. Proc. Brookfield, Conn., 1984. p. 265.Shukla G.G., Sichina W.G. Antec. 84Plast. World Econ. 42ndTechn. Conf. and Exhib. New Orleans, 1984. Conf. Proc. Brookfield, Conn., 1984. p. 265.Mijovic J., Gsell T.C. SAMPE QUART., 1990, v. 21, p. 42.Mijovic J., Gsell T.C. SAMPE QUART., 1990, v. 21, p. 42.Ko F. e.a. Mater - Pathway Future: 33rd Int. SAMPE. Symp. andExhib. Anaheim, Calif., 1988. Covina, Calif. 1988, p. 899.Ko F. e.a. Mater - Pathway Future: 33rd Int. SAMPE. Symp. andExhib. Anaheim, Calif., 1988. Covina, Calif. 1988, p. 899.Turner F.M. Cogswell F.N. 18 th Int. SAMPE Techn. Conf. Seattle, Wash., 1986. Covina, Calif. 1986, v. 18, p. 32.Turner F.M. Cogswell F.N. 18 th Int. SAMPE Techn. Conf. Seattle, Wash., 1986. Covina, Calif. 1986, v. 18, p. 32.Crosby J.M. e.a. 19 th Int. SAMPE Techn. Conf. Crystaly City, 1987. Covina, Calif. 1987, v. 19, p. 476.Crosby J.M. e.a. 19 th Int. SAMPE Techn. Conf. Crystaly City, 1987. Covina, Calif. 1987, v. 19, p. 476.Maguire D.M. Sampe J., 1989, v. 25, No 1, p. 11.Maguire D.M. Sampe J., 1989, v. 25, No 1, p. 11.Maffezzoli A.M. Sampe J., 1989, v. 25, No 1, p. 35.Maffezzoli A.M. Sampe J., 1989, v. 25, No 1, p. 35.Mach. Des., 1988, v. 60, No 5, p. 144.Mach. Des., 1988, v. 60, No 5, p. 144.Pritchard G., Kandles S.J. 16th KeinforcedPlast. Congr. Blackpool, 1988. London, 1988, p. 73.Pritchard G., Kandles S.J. 16th KeinforcedPlast. Congr. Blackpool, 1988. London, 1988, p. 73.Lhymn C. Adv. Polymer Techn., 1986, v. 6, No 2, p. 203.Lhymn C. Adv. Polymer Techn., 1986, v. 6, No 2, p. 203.Lhymn C. Wear, 1987, v. 114, No 2, p. 223.Lhymn C. Wear, 1987, v. 114, No 2, p. 223.Lhymn C. ASLE Trans., 1987, v. 30, No 3, p. 324.Lhymn C. ASLE Trans., 1987, v. 30, No 3, p. 324.Lhymn C., Lhymn I.O. Adv. Polymer. 1988, v. 8, No 4, p. 417.Lhymn C., Lhymn I.O. Adv. Polymer. 1988, v. 8, No 4, p. 417.Briscol D.J. e.a. Wear, 1986, v. 108, No 4, p. 357.Briscol D.J. e.a. Wear, 1986, v. 108, No 4, p. 357.Заявка Великобритании 2136439А.Заявка Великобритании 2136439А.Tanaka Ch. High Polymer Jap., 1989, v. 38, No 9, p. 890.Tanaka Ch. High Polymer Jap., 1989, v. 38, No 9, p. 890.Японская заявка 60-44551.Японская заявка 60-44551.Baeklund J. Rapp. Ingenjoersvetenskapsakal, 1986, No 302, p. 103.Baeklund J. Rapp. Ingenjoersvetenskapsakal, 1986, No 302, p. 103.Sham Chi e.a. Polymer, 1988, v. 29. No 6, p. 1016.Sham Chi e.a. Polymer, 1988, v. 29. No 6, p. 1016.Guo Q. e.a. Polymer Bull., 1988, v. 29. No 6, p. 517.Guo Q. e.a. Polymer Bull., 1988, v. 29. No 6, p. 517.Plastverarbeiter, 1987, Bd. 38, No 5, S. 46.Plastverarbeiter, 1987, Bd. 38, No 5, S. 46.Habcox N.L., Phillips D.C. Proc. 2nd Conf. Mater. End., London, 1985, p. 139.Habcox N.L., Phillips D.C. Proc. 2nd Conf. Mater. End., London, 1985, p. 139.Griffiths G.R. e.a. Mater - Pathway Future: 33rd Int. SAMPE. Symp. andExhib. Anaheim, Calif., 1988. Covina, Calif. 1988, p. 308.Griffiths G.R. e.a. Mater - Pathway Future: 33rd Int. SAMPE. Symp. andExhib. Anaheim, Calif., 1988. Covina, Calif. 1988, p. 308.Cogswell F.N. 28th Nat. SAMPE. Symp. andExhib. Anaheim, Calif., 1983. Azusa, Calif. 1983, v. 28, p. 528.Cogswell F.N. 28th Nat. SAMPE. Symp. andExhib. Anaheim, Calif., 1983. Azusa, Calif. 1983, v. 28, p. 528.Dickson R.F. e.a. J. Mat. Sci, 1985, v. 20, No 1, p. 60.Dickson R.F. e.a. J. Mat. Sci, 1985, v. 20, No 1, p. 60.Hartness J.T., Kim R.J. 28th Nat. SAMPE. Symp. andExhib. Anaheim, Calif., 1983. Azusa, Calif. 1983, v. 28, p. 535.Hartness J.T., Kim R.J. 28th Nat. SAMPE. Symp. andExhib. Anaheim, Calif., 1983. Azusa, Calif. 1983, v. 28, p. 535.Заявка ФРГ 3425960.Заявка ФРГ 3425960.Cervenka A. Polymer Comp., 1988, v. 9, No 4, p. 263.Cervenka A. Polymer Comp., 1988, v. 9, No 4, p. 263.Curtis D.C. e.a. Composites (Gr. Brit.), 1988, v. 19, No 6, p. 446.Curtis D.C. e.a. Composites (Gr. Brit.), 1988, v. 19, No 6, p. 446.Jaconis J.M. Adv. Mat. Techn., 1987: 32nd Int. SAMPE. Symp. andExhib. Anaheim, Calif., 1987. Covina, Calif. 1987, p. 104.Jaconis J.M. Adv. Mat. Techn., 1987: 32nd Int. SAMPE. Symp. andExhib. Anaheim, Calif., 1987. Covina, Calif. 1987, p. 104.Majidi A.P. e.a. 19 th Int. SAMPE Techn. Conf. Crystaly City, 1987. Covina, Calif. 1987, v. 19, p. 576.Majidi A.P. e.a. 19 th Int. SAMPE Techn. Conf. Crystaly City, 1987. Covina, Calif. 1987, v. 19, p. 576.Grove S.M., Short D. Plast. Rubb. Proc. Appl., 1988, v. 10, No 1, p. 34.Grove S.M., Short D. Plast. Rubb. Proc. Appl., 1988, v. 10, No 1, p. 34.Elsenussi A.K. Composites (Gr. Brit.), 1989, v. 20, No 3, p. 249.Elsenussi A.K. Composites (Gr. Brit.), 1989, v. 20, No 3, p. 249.Заявка ФРГ 3702929.Заявка ФРГ 3702929.Adaleman R.L. e.a. 13th Reinforced Plast. Congr. Brighton, 1982. London, 1982, p. 71.Adaleman R.L. e.a. 13th Reinforced Plast. Congr. Brighton, 1982. London, 1982, p. 71.Isikava T. e.a. J. Soc. Comp. Mat., 1986, v. 12, No 1, p. 8.Isikava T. e.a. J. Soc. Comp. Mat., 1986, v. 12, No 1, p. 8.Dreumel W.H.M. Composites, 1986, v. 26, No 3, p. 132.Dreumel W.H.M. Composites, 1986, v. 26, No 3, p. 132.Barnes J.A., Cogswell F.N. SAMPE Qurt., 1989, v. 20, No 3, p. 22.Barnes J.A., Cogswell F.N. SAMPE Qurt., 1989, v. 20, No 3, p. 22.Lee R.J. Composites, 1987, v. 18, No 1, p. 35.Lee R.J. Composites, 1987, v. 18, No 1, p. 35.Morton J., Godwin E.W. Compos. Struct., 1989, v. 13, No 1, p. 1.Morton J., Godwin E.W. Compos. Struct., 1989, v. 13, No 1, p. 1.Chan C.-M., Venkatraman S. Polymer Sci., Polymer Phys., 1987, v. B25, No 8, p. 1665.Chan C.-M., Venkatraman S. Polymer Sci., Polymer Phys., 1987, v. B25, No 8, p. 1665.Venkatraman S., Chan C.-M. Am. Chem. Soc. Polymer Preps., 1986, v. 27, No 1, p. 305.Venkatraman S., Chan C.-M. Am. Chem. Soc. Polymer Preps., 1986, v. 27, No 1, p. 305.Chan C.-M., Venkatraman S. J. Appl. Polymer Sci., 1986, v. 32, No 7, p. 5933.Chan C.-M., Venkatraman S. J. Appl. Polymer Sci., 1986, v. 32, No 7, p. 5933.Chang I.I. Mater - Pathway Future: 33rd Int. SAMPE. Symp. andExhib. Anaheim, Calif., 1988. Covina, Calif. 1988, p. 194.Chang I.I. Mater - Pathway Future: 33rd Int. SAMPE. Symp. andExhib. Anaheim, Calif., 1988. Covina, Calif. 1988, p. 194.Адаменко Н.А., Казуров А.В., Зерщиков К.Ю., Седов Э.В. Исследование влияния наполнителя на термомеханические свойства полиэфирэфиркетона. - Известия Волгоградского государственного технического университета. Т.4, № 4, 2010.Адаменко Н.А., Казуров А.В., Зерщиков К.Ю., Седов Э.В. Исследование влияния наполнителя на термомеханические свойства полиэфирэфиркетона. - Известия Волгоградского государственного технического университета. Т.4, № 4, 2010.

The authors declare that there are no conflicts of interest present.