Research of technological properties of mixed compositions based on polyolefin thermoplastic elastomers
https://doi.org/10.35164/0554-2901-2022-1-2-14-15
Abstract
Technological properties – phase transitions of mixed compositions based on polyolefin thermoplastic elastomers have been studied. The melting point and glass transition temperature of compositions were determined by DSC and DMA methods. The influence of the type of elastomer on the melting and glass transition temperatures of a mixed composite material is revealed.
About the Authors
K. V. KRASNOV
Polikom LLC
Russian Federation
Russian Federation
Moscow region
N. M. CHALAYA
Mendeleev University of Chemical Technology of Russia
Russian Federation
Russian Federation
Moscow
V. S. OSIPCHIK
Mendeleev University of Chemical Technology of Russia
Russian Federation
Russian Federation
Moscow
References
1. X. He, I. Rytöluoto, R. Anyszka, A. Mahtabani, E. Saarimäki, K. Lahti, M. Paajanen, W. Dierkes, andA. Blume. Surface modification of fumed silica by plasma polymerization of acetylene for PP/ POE blends dielectric nanocomposites // Polymers, vol. 11, no. 12, p. 1957 - 2019.
2. Da Silva A.L.N., Tavares M.I.B., Politano D.P., Coutinho F.M.B., Rocha M.C.G. Polymer blends based on polyolefin elastomer and polypropylene.// Journal of Applied Polymer Science. 66 (1997) 2005 – 2014.
3. J. Ying, S. Liu, F. Guo, X. Zhou, X. Xie. Non-isothermal crystallization and crystalline structure of PP/POE blends //Journal of Thermal Analysis and Calorimetry 91 (3), 723-731 - 2008.
Review
For citations:
KRASNOV K.V., CHALAYA N.M., OSIPCHIK V.S. Research of technological properties of mixed compositions based on polyolefin thermoplastic elastomers. Plasticheskie massy. 2022;1(1-2):14-15. (In Russ.) https://doi.org/10.35164/0554-2901-2022-1-2-14-15
Views:
306
Email this article 
