Rheological properties of dispersed-filled polymer composite materials based on polyethylene containing glass microbeads
https://doi.org/10.35164/0554-2901-2021-7-8-35-38
Abstract
This article presents the results of a study of the effect of the filler content on the rheological properties of polymer composite materials based on high density polyethylene containing glass microbeads. The flow curves of the compositions were obtained by the method of capillary viscosimetry. Simple mathematical models have been constructed that allow estimating the viscosity of the compositions’ melts based on a given filler content.
About the Authors
Q. D. Pham
MIREA Russian Technological University (Lomonosov Institute of Fine Chemical Technologies)
Russian Federation
Russian Federation
P. V. Surukov
MIREA Russian Technological University (Lomonosov Institute of Fine Chemical Technologies)
Russian Federation
Russian Federation
References
1. Кирсанов Е.А., Матвеенко В.Н. Неньютоновское поведение структурированных систем. М.: ТЕХНОСФЕРА, 2016. - 384 с.
2. Ji-Zhao Liang, R. K. Y. Li. Rheological properties of glass bead-filled low-density polyethylene composite melts in capillary extrusion // Journal of Applied Polymer Science, 1999, Vol. 73, №6, P. 1451-1456.
3. Симонов-Емельянов И.Д. Построение структур в дисперсно-наполненных полимерах и свойства композиционных материалов / Пластические массы. - 2015, №9-10. - С. 29-36.
4. Чанг Д.Х. Реология в процессах переработки полимеров. Пер. с англ. / под ред. Виноградова Г.В. и Фридмана М.Л. - М.: Химия. - 1979. - 368 с.
5. Дж. Хаппель. Гидродинамика при малых числах Рейнольдса. Пер. с англ. - М.: Мир. - 1976. - 537 с.
Review
For citations:
Pham Q.D., Surukov P.V. Rheological properties of dispersed-filled polymer composite materials based on polyethylene containing glass microbeads. Plasticheskie massy. 2021;(7-8):35-38. (In Russ.) https://doi.org/10.35164/0554-2901-2021-7-8-35-38
Views:
459
Email this article 
