Influence of technological modes on strength properties of composite materials based on polyimides
https://doi.org/10.35164/0554-2901-2020-5-6-23-24
Abstract
A technology for producing composite materials based on polyimides is proposed. The obtained composite materials were tested for tensile strength. The dependence of the tensile strength on the concentration of the polyimidic acid solution is determined. The degree of impregnation of manufactured samples was investigated. The dependence of the tensile strength on the degree of impregnation is determined.
About the Authors
V. M. Aristov
D. Mendeleev University of Chemical Technology of Russia
Russian Federation
Russian Federation
Moscow.
E. P. Aristova
D. Mendeleev University of Chemical Technology of Russia
Russian Federation
Russian Federation
Moscow.
References
1. Крыжановский В.К. Производство изделий из полимерных материалов. СПб.: Профессия, 2008. 460 с.
2. Михайлин Ю.А. Термоустойчивые полимеры и полимерные материалы. СПб.: Профессия, 2006. 624 с.
Review
For citations:
Aristov V.M., Aristova E.P. Influence of technological modes on strength properties of composite materials based on polyimides. Plasticheskie massy. 2020;(5-6):23-24. (In Russ.) https://doi.org/10.35164/0554-2901-2020-5-6-23-24
Views:
474
Email this article 
