Preview

Plasticheskie massy

Advanced search

An increase of the mechanical strength and hardness of polymeric materials radiation-crosslinked by X-ray radiation from an gaseous electric discharge

https://doi.org/10.35164/0554-2901-2019-11-12-7-9

Abstract

The problem of investigation of mechanical and electrophysical properties of polymeric materials crosslinked by X-ray radiation from a gaseous electric discharge is considered. The effect of radiation crosslinking on the mechanical strength and hardness of polymers is presented by the example of samples of various thicknesses (from 0.08 mm to 10 mm) of LDPE and HDPE made using crosslinking technology by X-ray radiation from a barrier gaseous electric discharge proposed in [1]. Experimental data obtained on samples of low molecular weight LDPE-107-02K and high molecular weight HDPE-271-82K made in the form of dumbbell, cut in accordance with GOST IEC 60811-2-1 from PE plates, are considered. To study the electrophysical properties and the depth of semi-absorption of X-ray radiation from gaseous electric discharge, LDPE and HDPE samples in the form of disks of different thicknesses were used.

The depth of penetration of X-ray radiation from a gaseous discharge into LDPE-107-02K and HDPE-271-82K was estimated.

Comparative studies of changes in the electrophysical properties of mechanical strength and hardness of cable LDPE under the influence of X-ray radiation from gaseous discharge and under the influence of an electron beam are carried out.

It is shown that the mechanical strength and hardness of LDPE and HDPE can be increased by at least 30% and 60% respectively via radiation crosslinking by X-ray from a gaseous discharge.

About the Authors

G. K. Novikov
Irkutsk National Research Technical University
Russian Federation


V. V. Fedchishin
Irkutsk National Research Technical University
Russian Federation


A. I. Smirnov
Irkutsk State University
Russian Federation


References

1. Новиков Г.К., Потапов В.В., Суслов К.В., Федчишин В.В. Основы электротехнологии (электросинтез озона, плазменная модификация полимерных кабельных диэлектриков): учеб. пособие. - Иркутск: Изд-во ИРНИТУ, 2017. - 208 с.

2. Нагревостойкие провода и кабели с радиационно-модифицированной изоляцией/ Финкель Э.Э., Брагинский Р.П. Москва: Энергия, 1975, 193 c.

3. Новиков Г.К. Плазмофизические электротехнологии модификации полиолефиновой кабельной изоляции: монография / Г.К.Новиков; Иркутский гос.техн.ун-т. - Изд-во ИрГТУ, 2007. - 104 с.

4. Новиков Г.К., Потапов В.В., Суслов К.В., Федчишин В.В. Электротехнологическое и конструкционное материаловедение. - Иркутск: Изд-во ИрГТУ, 2014. - 336 с.

5. Новиков Г.К., Федчишин В.В. Электрически активные центры захвата носителей заряда в неполярных и полярных полимерных диэлектриках. ж. Электричество. - 2016. - №11. - С.51-54.

6. Новиков Г.К., Федчишин В.В. Электрически активные центры захвата носителей заряда в диоксиде кремния SiO2 и слюде. ж. Электричество. - 2017. - №5. - С.57-61.

7. Новиков Г.К., Смирнов А.И., Жданов А.С. Способ получения сшивного кабельного полиэтилена. Патент РФ № 2250912, БИ № 12. - 27.04.2005.

8. Новиков Г.К., Смирнов А.И. Устройство для сшивания кабельной изоляции. Патент РФ № 2322716, БИ № 11. - 20.04.2008.

9. Новиков Г.К., Федчишин В.В., Суслов К.В., Смирнов А.И., Потапов В.В., Новиков В.В., Пушко О.Е. Способ радиационной сшивки полимерной изоляции электрических кабелей и проводов и устройство для его осуществления // Патент РФ 2662532, Опубл. 26.07.2018 Бюл. №21.

10. Новиков Г.К., Потапов В.В., Суслов К.В., Федчишин В.В., Шушпанов И.Н. Современная электротехнология: плазменная модификация полимерных кабельных диэлектриков, электросинтез озона 6. Монография. - Иркутск: Изд-во ИРНИТУ, 2018. - 180 с.


Review

For citations:


Novikov G.K., Fedchishin V.V., Smirnov A.I. An increase of the mechanical strength and hardness of polymeric materials radiation-crosslinked by X-ray radiation from an gaseous electric discharge. Plasticheskie massy. 2019;1(11-12):7-9. (In Russ.) https://doi.org/10.35164/0554-2901-2019-11-12-7-9

Views: 692


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 0554-2901 (Print)