Investigation of the processes of modification of polyimide systems required to create composite multilayer materials
https://doi.org/10.35164/0554-2901-2019-5-6-6-8
Abstract
We investigated the processes of modification of polyamid acid to obtain polyimide films. The rheological and deformation- strength properties of the modified polyimide materials were determined. Developed modified polyimide systems with adjustable have been developed.
About the Authors
A. S. Yegorov
IREA The state scientific-research institute of chemical reagents and high purity chemical substance
Russian Federation
Moscow
Russian Federation
Moscow
N. M. Chalaya
Interregional Institute of Plastics Processing Scientific-Production Association "Plastic" JSC
Russian Federation
Moscow
Russian Federation
Moscow
D. V. Kramarev
Interregional Institute of Plastics Processing Scientific-Production Association "Plastic" JSC
Russian Federation
Moscow
Russian Federation
Moscow
V. S. Osipchik
Dmitry Mendeleev University of Chemical Technology of Russia
Russian Federation
Moscow
Russian Federation
Moscow
V. N. Ivashkina
Dmitry Mendeleev University of Chemical Technology of Russia
Russian Federation
Moscow
Russian Federation
Moscow
References
1. Крамарев Д.В., Азаров В.Г., Осипчик В.С., Чалая Н.М., Березина А.Б. Изучение процессов имидизации и модификации полиимидных материалов для многослойных конструкций // Пластические массы. 2016, №9-10, с.7-10.
2. Петроградский А.В., Травкин А.Е., Копылов В.М., Харламова А.А., Женева М.В. Синтез и исследование поверхностно-активных свойств полиоксиалкиленсилоксанов.// Ж.Общ. Химия, 2009. – Т.79(141), №12, с.2003–2007.
3. Инструкция по работе на ротационном вискозиметре Brookfield DV2T.
4. Горбаткина Ю.А. Связь прочности пластиков, армированных волокнами, с адгезионной прочностью соединений волокно–матрица // Механика композиционных материалов. – 2000. – Т.36, №3. – С. 291–304.
Review
For citations:
Yegorov A.S., Chalaya N.M., Kramarev D.V., Osipchik V.S., Ivashkina V.N. Investigation of the processes of modification of polyimide systems required to create composite multilayer materials. Plasticheskie massy. 2019;(5-6):6-8. (In Russ.) https://doi.org/10.35164/0554-2901-2019-5-6-6-8
Views:
634
Email this article 
