Preview

Plasticheskie massy

Advanced search

Increasing the stability to UV radiation of industrial products from fiberglass

Abstract

The results of practical experimental data on increasing the resistance to UV radiation of industrial fiberglass reinforced plastic products based on epoxy anhydride binder modified with additives of polymethylene esters of phenols and boric acid and light stabilizers based on benzophenone and benzotriazole are presents in the article. The specifics of the application of these additives in production are reflected. The results of accelerated aging tests of the obtained samples in weathering tester are shown.

About the Authors

A. V. Ozhogin
Бийский технологический институт (филиал) ФГБУО ВО «АлтГТУ им. И.И. Ползунова»
Russian Federation


M. A. Lenskiy
Бийский технологический институт (филиал) ФГБУО ВО «АлтГТУ им. И.И. Ползунова»
Russian Federation


D. V. Korabel'nikov
Бийский технологический институт (филиал) ФГБУО ВО «АлтГТУ им. И.И. Ползунова»
Russian Federation


A. N. Novitskiy
Бийский технологический институт (филиал) ФГБУО ВО «АлтГТУ им. И.И. Ползунова»
Russian Federation


References

1. Dubois, C. Degradation of an epoxy-glass-fibre laminate under photo-oxidation/leaching complementary constraints / C. Dubois, L. Monney, N. Bonnet, A. Chambaudet // J. Composites: Part A. 1999. - vol. 30. - P. 361-368.

2. Иванов, Н.С. Естественное старение полиэфирных стеклопластиков в атмосферных условиях, морской воде, топливе и масле / Н.С. Иванов, B.C. Новикова, Г.И. Шмелева // Свойства судостроительных стеклопластиков и методы их контроля. - 1974. - Вып. 3. - С. 49-60.

3. Доос, А.В. Физико-химия и механика ориентированных стеклопластиков / А.В. Доос. - М.: Наука, 1967. - 234 c.

4. Ожогин, А.В. Исследование борорганических олигомеров в качестве модификаторов прочности стеклопластиков / А.В. Ожогин, М.А. Ленский, Д.В. Корабельников, Ю.Ю. Свирина // Пластические массы. - 2014. - №5-6. - С. 33-36.

5. Ожогин, А.В. Борорганические олигомеры в качестве УФ-стабилизаторов стеклопластиков / А.В Ожогин, М.А. Ленский, Д.В. Корабельников, А.Н. Новицкий // Пластические массы. - 2018. - №11-12. - С. 58-60.


Review

For citations:


Ozhogin A.V., Lenskiy M.A., Korabel'nikov D.V., Novitskiy A.N. Increasing the stability to UV radiation of industrial products from fiberglass. Plasticheskie massy. 2019;(1-2):57-59. (In Russ.)

Views: 493


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 0554-2901 (Print)