The influence of the polymer on reservoir quality of fuel during storage
https://doi.org/10.35164/0554-2901-2017-11-12-58-60
Abstract
The influence of the chemical nature of the polymer used for the production of tanks, the quality of the fuel during its storage. The change in fuel quality during storage in reservoirs on the basis of polyurethane and a multilayer polymer film is determined by the content of low molecular weight polymer fractions. When using rubber additionally, the fuel quality is determined by the content of the plasticizer. Extracted from rubber carbon black affects the result of determining the quality of the fuel after contact with the polymer material.
About the Authors
Yu. N. Rybakov
V 25 GosNII chemmotology of the Ministry of defense of the Russian Federation
Russian Federation
Russian Federation
D. V. Kolotilin
V 25 GosNII chemmotology of the Ministry of defense of the Russian Federation
Russian Federation
Russian Federation
A. V. Dedov
V 25 GosNII chemmotology of the Ministry of defense of the Russian Federation
Russian Federation
Russian Federation
References
1. Рыбаков Ю.Н., Ванчугов Н.А. Применение эластичных резервуаров на объектах топливозаправочного комплекса авиатопливообеспечения // Научный вестник МГТУ ГА, №183, 2012, с. 173-175.
2. Рыбаков Ю.Н., Харламова О.Д., Кюннап Р.И., Чириков С.И., Плохой Д.С. Перспективы развития полевых складов горючего // Научный вестник МГТУ ГА, №206, 2014, c. 122 - 126.
3. Левинин С.В., Симаев М.С., Михеев Ю.М. Методы оценки стойкости резин и прорезиненных тканей к действию нефтепродуктов. М., ЦНИИТЭнефтехим, 1982. 30 с.
4. Дринберг С.А., Ицко Э.Ф. Растворители для лакокрасочных материалов. Ленинград. Химия. 1989.156 с.
Review
For citations:
Rybakov Yu.N., Kolotilin D.V., Dedov A.V. The influence of the polymer on reservoir quality of fuel during storage. Plasticheskie massy. 2017;(11-12):58-60. (In Russ.) https://doi.org/10.35164/0554-2901-2017-11-12-58-60
Views:
242
Email this article 
