Use of talc and pyrogenic silicon dioxides as dispersants in production of rigid polyvinyl chloride films filled with calcium carbonate
https://doi.org/10.35164/0554-2901-2024-03-29-31
Abstract
The influence of dispersing agents (talc and hydrophilic silicon dioxides) on the physical and mechanical properties of rigid polyvinyl chloride (PVC) films filled with calcium carbonate is considered. Test results for tensile strength, elongation at break and impact strength were analyzed for film samples containing different ratios of dispersant and filler.
About the Authors
N. A. Lavrov
Saint Petersburg State Institute of Technology (Technical University)
Russian Federation
Russian Federation
Saint Petersburg
V. Y. Kurdesov
Saint Petersburg State Institute of Technology (Technical University)
Russian Federation
Russian Federation
Saint Petersburg
E. V. Belukhichev
LLC «Klöckner Pentaplast Rus»
Russian Federation
Russian Federation
Saint Petersburg
References
1. Wypych G. Handbook of fillers. Fourth Edition. Toronto, Canada: ChemTech Publishing, 2016. 938 p. ISBN 978-1-927885-10-9.
2. Grossman R.F. Handbook of vinyl formulating. Second Edition. Hoboken, USA: Wiley-Interscience, 2008. 531 p. – ISBN 978-0471-71046-2.
3. Wypych G. PVC formulary. Third Edition. Toronto, Canada: ChemTech Publishing, 2020. 410 p. – ISBN 978-1-927885-64-2.
4. Tuen B.S., Hassan A., Abu Bakar A. Mechanical properties of talc- and (calcium carbonate)-filled poly(vinyl chloride) hybrid composites // Journal of Vinyl and Additive Technology. 2012. Vol.18. P. 76–86. http://doi.org/10.1002/vnl.20280.
5. Tuen B.S., Hassan A., Abu Bakar A. Thermal properties and processability of talc- and calcium carbonate-filled poly(vinyl chloride) hybrid composites // Journal of Vinyl and Additive Technology. 2012. Vol.18. P. 87–94. https://doi.org/10.1002/vnl.20312.
6. Гузеев В.В., Мартынова Л.М., Шкаленко Ж.И., Уртминцева Н.П. Структурно-термодинамические аспекты усиления поливинилхлорида наполнителями // Высокомолекулярные соединения. 1982. №6. С. 411–414.
7. Исламов А.М., Габбасов Д.А., Хантимиров А.Г., Хозин В.Г., Абдрахманова Л.А., Низамов Р.К. Древесно-полимерные композиты на основе поливинилхлорида, модифицированные аэросилом // Известия КГАСУ. 2016. №4 (38). С. 359–364.
8. Fellahi S., Boukobbal S., Boudjenana F. Study of the effect of fumed silica on rigid PVC properties // Journal of Vinyl Technology. 1993. Vol.15. №1. P. 17–21. https://doi.org/10.1002/vnl.730150106.
9. Wiebking H.E. The performance of ultrafine talc in rigid PVC // Journal of Vinyl and Additive Technology. 1996. Vol.2. №3. P. 187–189. https://doi.org/10.1002/vnl.10121.
10. Selvaraj D.E., Vijayaraj R., Satheeshwaran U., Nancy J., Sugumaran C.P., Kumar M.R., Ganesan J., Geethadevi S., Kumar S.D. Experimental investigation on electrical and mechanical characteristics of PVC cable insulation with silica nano filler // Applied Mechanics and Materials. 2015. Vol.749. P. 159–163. https://doi.org/10.4028/www.scientific.net/AMM.749.159
Review
For citations:
Lavrov N.A., Kurdesov V.Y., Belukhichev E.V. Use of talc and pyrogenic silicon dioxides as dispersants in production of rigid polyvinyl chloride films filled with calcium carbonate. Plasticheskie massy. 2024;(3):29-31. (In Russ.) https://doi.org/10.35164/0554-2901-2024-03-29-31
Views:
118
Email this article 
