Polymer composite materials based on a binder from renewable raw materials: the effect of a filler on the physical and mechanical properties
https://doi.org/10.35164/0554-2901-2024-01-40-43
Abstract
Polymer composite materials have been developed using polyester-urethane-acrylate resin based on 2,5-furandicarboxylic acid obtained from plant biomass and a number of synthetic (carbon, glass, and aramid fibers) and mineral (basalt) fibrous fillers. The high operational characteristics of the obtained PCMs are demonstrated. The effect of hybridization of synthetic fibers with natural cellulose fibers (cotton) on the physical and mechanical properties of polymer composite materials has been studied. An increase in tensile strength with a simultaneous decrease in the density of PCM using a carbon fi ber/cotton hybrid filler is shown.
About the Authors
D. S. Petrenko
Platov South-Russian State Polytechnic University (NPI)
Russian Federation
Russian Federation
Novocherkassk
V. A. Klushin
Platov South-Russian State Polytechnic University (NPI)
Russian Federation
Russian Federation
Novocherkassk
A. A. Petrenko
Platov South-Russian State Polytechnic University (NPI)
Russian Federation
Russian Federation
Novocherkassk
A. A. Ulyankina
Platov South-Russian State Polytechnic University (NPI)
Russian Federation
Russian Federation
Novocherkassk
N. V. Smirnova
Platov South-Russian State Polytechnic University (NPI)
Russian Federation
Russian Federation
Novocherkassk
References
1. Adekomaya, O. Industrial and biomedical applications of fiber reinforced composites / O. Adekomaya, T. Majozi // Fiber Reinforced Composites. ‒ 2021. ‒ P. 753‒783.
2. Thermal stability of natural fibers and their polymer composites / M. Asim, M. T. Paridah, M. Chandrasekar [et al.] // Iranian Polymer Journal. ‒ 2020. ‒ V. 29, №7. ‒ P. 625‒648.
3. Mechanical, morphological, and thermal characteristics of epoxy/ glass fiber/cellulose nanofiber hybrid composites / T. Azhary, M. Kusmono, W. Wildan [et al.] // Polymer Testing. ‒ 2022. ‒ V. 110. ‒ P. 107560.
4. Natural fiber eco-composites / G. Bogoeva-Gaceva, M. Avella, M. Malinconico [et al..] // Polymer Composites. ‒ 2007. ‒ V. 28, №1. ‒ P. 98‒107.
5. Environmental durability of carbon/flax fiber hybrid composites / M. Cheng, Y. Zhong, U. Kureemun [et al.] // Composite Structures. ‒ 2020. ‒ V. 234. ‒ P. 111719.
6. Properties and performances of various hybrid glass/natural fibre composites for curved pipes / G. Cicala, G. Cristaldi, G. Recca [et al.] // Materials & Design. ‒ 2009. ‒ V. 30, №7. ‒ P. 2538-2542.
7. Development of fl ax/carbon fibre hybrid composites for enhanced properties / H. N. Dhakal, Z. Y. Zhang, R. Guthrie [et al.] // Carbohydrate Polymers. ‒ 2013. ‒ V. 96, №1. ‒ P. 1‒8.
8. A novel polyfunctional polyurethane acrylate prepolymer derived from bio-based polyols for UV-curable coatings applications / J. Huang, Y. Xiong, X. Zhou [et al.] // Polymer Testing. ‒ 2022. ‒ V. 106. ‒ P. 107439.
9. Review on natural plant fibres and their hybrid composites for structural applications: Recent trends and future perspectives / S.O. Ismail, E. Akpan, H.N. Dhakal // Composites Part C: Open Access. ‒ 2022. ‒ V. 9. ‒ P. 100322.
10. Recent developments and challenges in natural fiber composites: A review / P. Jagadeesh, M. Puttegowda, P. Boonyasopon [et al.] // Polymer Composites. ‒ 2022. ‒ V. 43, №5. ‒ P. 2545‒2561.
11. Kushwaha, P.K. The Studies on Performance of Epoxy and Polyester-based Composites Reinforced with Bamboo and Glass Fibers / P.K. Kushwaha, R. Kumar // Journal of Reinforced Plastics and Composites. ‒ 2010. ‒ V. 29, №13. ‒ P. 1952‒1962.
12. Marmol, G. Automotive and construction applications of fiber reinforced composites / G. Marmol, D. P. Ferreira, R. Fangueiro // Fiber Reinforced Composites. ‒ 2021. ‒ P. 785‒819.
13. Panthapulakkal, S. Injection-molded short hemp fiber/glass fiberreinforced polypropylene hybrid composites ‒ мechanical, water absorption and thermal properties / S. Panthapulakkal, M. Sain // Journal of Applied Polymer Science. ‒ 2007. ‒ V. 103, №4. ‒ P. 2432‒2441.
14. Passauer, L. A case study on the thermal degradation of an acrylatetype polyurethane wood coating using thermogravimetry coupled with evolved gas analysis / L. Passauer // Progress in Organic Coatings. ‒ 2021. ‒ V. 157. ‒ P. 106331.
15. Natural fiber reinforced biomass-derived poly(ester-urethane–acrylate) composites for sustainable engineering applications / D. Petrenko, V. Klushin, A. Zelenskaya [et al.] // Journal of Polymer Research. ‒ 2022. ‒ T. 29, №12. ‒ C. 503.
16. Tensile properties hybrid effect of unidirectional fl ax/carbon fiber hybrid reinforced polymer composites / A. Wang, X. Liu, Q. Yue [et al.] // Journal of Materials Research and Technology. ‒ 2023. ‒ V. 24. ‒ P. 1373‒1389.
17. Bio-based Polymeric Materials Synthesized from Renewable Resources: A Mini-Review / Y. Xie, S. Gao, D. Zhang [et al.] // Resources Chemicals and Materials. ‒ 2023. ‒ V.2. ‒ P. 223‒230.
18. Towards green composites: Bioepoxy composites reinforced with bamboo/basalt/carbon fabrics / K. Yorseng, S. Mavinkere Rangappa, J. Parameswaranpillai [et al.] // Journal of Cleaner Production. ‒ 2022. ‒ V. 363. ‒ P. 132314.
19. Реактопласты на основе бис-фталонитрилов в качестве термостойких матриц для полимерных композиционных материалов / В.А. Булгаков, О.С. Морозов, И.А. Тимошкин [и др.] // Высокомолекулярные соединения (серия С). ‒ 2021. ‒ T. 63, №1. ‒ C. 54‒59.
20. Композиционный материал на основе полиолефинов и модифицированных растительных наполнителей / А.В. Горбачев, И.З. Файзуллин, С.И. Вольфсон [и др.] // Пластические массы. ‒ 2023. ‒ T. 1, №1‒2. ‒ C. 48‒52.
21. Изучение влияния модифицированных волокон на свойства эпоксидного композита. / Л.В. Корчина, Н.Г. Зубова, В.М. Герасимова, Т.П. Устинова // Пластические массы. ‒ 2017. ‒ T. 1‒2. ‒ C. 44‒45.
22. Композитные материалы на основе биовозобновляемых полиэфирмалеинатов. / Д.С. Петренко, В.А. Клушин, А.Н. Яценко [и др.] // Известия вузов. Северо-Кавказский регион. Серия: Технические науки. ‒ 2021. ‒ T. №4 (212).
Review
For citations:
Petrenko D.S., Klushin V.A., Petrenko A.A., Ulyankina A.A., Smirnova N.V. Polymer composite materials based on a binder from renewable raw materials: the effect of a filler on the physical and mechanical properties. Plasticheskie massy. 2024;(1):40-43. (In Russ.) https://doi.org/10.35164/0554-2901-2024-01-40-43
Views:
337
Email this article 
