Study of the properties of combined multilayer polymer materials for aeronautical equipment
https://doi.org/10.35164/0554-2901-2024-01-19-23
Abstract
The results of studies of changes in the physical and mechanical properties of heat-resistant polyethylene terephthalate (PET), polymide (PI) and fluoroplastic (PP) films, as well as synthetic polyethylene terephthalate (PET) and aramid fabrics in a wide range of specified exposure temperatures and temperature exposure times are presented. The most suitable heat-resistant polymer films and fabrics for use in inflatable structures of aeronautical equipment have been identified. An assessment of the operational parameters of the investigated materials showed linear character of change in properties in a given temperature and time interval of researches.
About the Authors
A. A. Efremova
Mendeleev University of Chemical Technology of Russia
Russian Federation
Russian Federation
Moscow
N. M. Chalaya
Mendeleev University of Chemical Technology of Russia
Russian Federation
Russian Federation
Moscow
T. A. Ivanenko
Joint Stock Company “Interindustry Institute of Plastics Processing – NPO “Plastic”
Russian Federation
Russian Federation
Moscow
I. N. Tsapenko
Joint Stock Company “Interindustry Institute of Plastics Processing – NPO “Plastic”
Russian Federation
Russian Federation
Moscow
A. A. Shchepelev
Mendeleev University of Chemical Technology of Russia
Russian Federation
Russian Federation
Moscow
References
1. Михайлин Ю.А. Термоустойчивые полимеры и полимерные материалы. СПб.: Профессия. 2006. 624 с.
2. Полиимиды – класс термостойких полимеров / п од ред. Бессонова М.И.. Л.: Наука. 1983. 306 с.
3. Бейдер Э.Я. и др. Опыт применения фторполимерных материалов в авиационной технике // Российский химический журнал. 2008. Т. 52. №3. С. 30–44.
4. Романко О.И., Шаповал В.Н. О связи химического строения и термических свойств полиимидов // Вестник Московского государственного технического университета им. Н.Э. Баумана. Серия «Естественные науки». 2016. №2 (65). С. 103–113.
5. Collision-assisted erosion of hydrocarbon polymers in atomic-oxygen environments / Minton T. K. et al. // High Performance Polymers. 2000. V. 12. №1. P. 27–42.
6. Deopura B. L., Padaki N. V. Synthetic textile fibres: polyamide, polyester and aramid fibres // Textiles and Fashion. – Woodhead Publishing, 2015. P. 97–114.
7. Wilson J. Handbook of textile design // Elsevier. 2001. Р. 328–391.
Review
For citations:
Efremova A.A., Chalaya N.M., Ivanenko T.A., Tsapenko I.N., Shchepelev A.A. Study of the properties of combined multilayer polymer materials for aeronautical equipment. Plasticheskie massy. 2024;(1):19-23. (In Russ.) https://doi.org/10.35164/0554-2901-2024-01-19-23
Views:
243
Email this article 
