Composite materials based on polyetheretherketone
https://doi.org/10.35164/0554-2901-2023-1-2-11-13
Abstract
The work is devoted to the study of physical and mechanical processes occurring during the processing of modified and filled etheretherketone, and the development of a composite material with high performance properties. The effect of co-polyarylethyrketone and glass and carbon fibers on the properties of polyetheretherketone is shown. The critical length of reinforcing fibers is calculated. The effect of the heat annealing process on the properties of the obtained compositions of different compositions has been revealed.
About the Authors
E. Y. Lyashenko
Joint-stock company “G.S. Petrov Institute of Plastics”
Russian Federation
Russian Federation
Moscow
K. A. Yakovleva
Federal State-Funded Educational Institution of Higher Education “Mendeleev University of Chemical Technology of Russia” (Mendeleev University of Chemical Technology)
Russian Federation
Russian Federation
Moscow
T. I. Andreeva
Joint-stock company “G.S. Petrov Institute of Plastics”
Russian Federation
Russian Federation
Moscow
T. N. Prudskova
Joint-stock company “G.S. Petrov Institute of Plastics”
Russian Federation
Russian Federation
Moscow
T. P. Kravchenko
Federal State-Funded Educational Institution of Higher Education “Mendeleev University of Chemical Technology of Russia” (Mendeleev University of Chemical Technology)
Russian Federation
Russian Federation
Moscow
I. Yu. Gorbunova
Federal State-Funded Educational Institution of Higher Education “Mendeleev University of Chemical Technology of Russia” (Mendeleev University of Chemical Technology)
Russian Federation
Russian Federation
Moscow
N. G. Davidyants
Federal State-Funded Educational Institution of Higher Education “Mendeleev University of Chemical Technology of Russia” (Mendeleev University of Chemical Technology)
Russian Federation
Russian Federation
Moscow
References
1. David Kemmish. Update on the Technology and Applications of Polyaryletherketones // 2010. – 624 с.
2. Shukla Devesh, Negi Singh Yuvraj, Sen Uppadhyaya Jugmendra, Kumar Vijai. Synthesis and modification of poly (ether ether ketone) and their properties: A review // Polym. Rev. – 2012. – №2. – P. 189–228. DOI: 10.1080/15583724.2012.668151
3. Беев А.А., Хаширова С.Ю., Беева Д.А., Шокумова М.У. Порошкообразные ароматические полиэфирэфиркетоны и сополиэфирэфиркетоны // Пластические массы. – 2022. – №7–8. – С. 6–9. DOI: 10.35164/0554-2901-2022-7-8-6-9.
4. Патент N 2673242 Российская Федерация, МПК C08G 65/40 (2006.01), C08G 65/46 (2006.01). Способ получения полиэфирэфиркетона: № 2018123326: заявл. 27.06.2018: опубликовано 23.11.2018 / Гуреньков В.М., Чеботарев В.П., Прудскова Т.Н., Андреева Т.И.; заявитель Институт пластмасс. – 13 с.
5. Патент N 2709448 Российская Федерация, МПК C08L 81/02
6. (2006.01).Полимернаякомпозициянаосноветермопластичного ароматического полиэфирэфиркетона: № 2019119392: заявл. 21.06.2019: опубликовано 17.12.2019 / Чеботарев В.П., Ляшенко Е.Ю., Гуреньков В.М., Андреева Т.И.; заявитель Институт пластмасс. – 11 с.
7. Patel Parina, Hull T. Richard, Lyon Richard E., Stoliarov Stanislav I., Walters Richard N., Crowley Sean, Safronova Natallia. Investigation of thethermal decomposition and flammability of PEEK and its carbon and glass-fibre composites // Polym. Degrad. and Stab. – 2011 – №1. – Р. 12–22. DOI: 10.1016/j.polymdegradstab.2010.11.009.
8. Regis, M., Zanetti, M., Pressacco, M., Bracco, P. Opposite role of different carbon fiber reinforcements on the non-isothermal crystallization behavior of poly(etheretherketone) // Mater. Chem. Phys. –2016. – P. 223–231. DOI: 10.1016/J.MATCHEMPHYS.2016.05.034.
9. Patel P., Richard H., Lyon R., et al. Investigation of the thermal decomposition and flammability of PEEK and its carbon and glass-fibre composites// Polym. Degrad. Stabil. – 2011. – Vol. 96. – P. 12–22. DOI: 10.1016/j.polymdegradstab.2010.11.009
10. Chen C., Zhang C., Liu C., et al. Rate-dependent tensile failure behavior of short fiber reinforced PEEK // Compos. Part B. – 2018. –Vol. 136. –P. 187–196. DOI: 10.1016/j.compositesb.2017.10.031.
11. Zhu Kaili, Tan Hongsheng, Wang Yajie, Liu Changheng, Ma Xiaomin, Wang Jie, Xing Haini Crystallization and Mechanical Properties of Continuous Carbon Fiber Reinforced Polyether-ether-ketone Composites // Fiber. and Polym. – 2019. – 20. – N4. – С. 839–846. DOI: 10.1007/s12221-019-8791-5.
12. Келли, А. Высокопрочные материалы / А. Келли, пер. с англ. д-ра техн. наук С.Т. Милейко. – Москва: Мир, 1976. – С. 156–203.
13. Михайлин Ю.А. Конструкционные полимерные композиционные материалы / Ю.А. Михайлин. – 2-е изд., испр. и доп. – Санкт-Петербург: Научные основы и технологии (НОТ), 2010. – С. 52–88.
14. Баранов А.Б., Андреева Т.И., Симонов-Емельянов И.Д., Пексимов О.Е. Структура, составы и получение литьевых композиционных материалов на основе стеклонаполненного полисульфона // Тонкие химические технологии. – 2019. – Том 14. – №4. – С. 39–44. DOI: 10.32362/2410-6593-2019-14-4-39-44.
Review
For citations:
Lyashenko E.Y., Yakovleva K.A., Andreeva T.I., Prudskova T.N., Kravchenko T.P., Gorbunova I.Yu., Davidyants N.G. Composite materials based on polyetheretherketone. Plasticheskie massy. 2023;1(1-2):11-13. (In Russ.) https://doi.org/10.35164/0554-2901-2023-1-2-11-13
Views:
325
Email this article 
