Comparative characteristics of products of processing of fusible copoly (urethane-imides) from the solutions and melts formed by them

   Self-supporting films and thick-walled moldings (blades) were obtained from solutions and melts of multiblock (segmental) copoly(urethane-imides). The initial copoly(urethane-imides) were obtained on the basis of aliphatic polyesters: poly(propyleneglycol), poly(diethyleneglycoladipinate) and polycaprolactone, dianhydride of 1,3-bis(3’,4-dicarboxyphenoxy) benzene and aromatic diamines: 4,4’-bis-(4”-aminophenoxy)biphenyl and 1,4-bis(4’-aminophenoxy)diphenylsulfone. Samples of films and moldings were studied by IR spectroscopy, TGA, DSC and mechanical analysis under static and dynamic (DMA) experimental conditions. It is assumed that the diff erences in the properties of films and moldings are due to an increase in the proportion of aromatic blocks due to microdestruction of polymer chains and increased interfacial interactions of polyester and urethanimide microphases (blocks) in polymer systems during the processing of polymers from the melt by injection molding.

1. M. I. Bessonov, M. M. Koton, V. V. Kudryavtsev, and L. A. Laius. Polyimides Thermally Stable Polymers. Consultants Bureau, N. Y., 1987, P. 318.

2. K. L. Mittal, Ed., Polyimides: Synthesis, Characterization, and Applications, Vol. 1, Plenum Press, New York, 1984.

3. Коршак В. В. Термостойкие полимеры / В. В. Коршак. – М.: Наука, 1969. – C. 411.

4. P. M. Hergenrother. The Use, Design, Synthesis, and Properties of High Performance/ High Temperature Polymers: an Overviw. High Performance Polymers, V. 15, P. 3-45, (2003).

5. X. Sang, R. Wang, X. Chen, L. Zhang, M. An, Y. Shen, Advanced Materials Research, 2011, 284-286, 1746. doi: 10.4028/www.scientific.net/AMR.284-286.1746.

6. T. Ueda, S.-I. Inoue, Organic Polymer Materials, 2018, V. 8, 11. doi: 10.4236/ojopm.2018.81001.

7. A. Jonquieres, R. Clement, P. Lochon, Prog. Polym. Sci, 2002, V. 27, 1803. doi: 10.1016/S0079-6700(02)00024-2.

8. X. Solimando, J. Babin, C. Arnal-Herault, M. Wang, D. Barth, D. Roizard, J.-R. Doillon-Halmenschlager, M. Poncot, I. Royaud, P. Alcouffe, L. David, A. Jonquires, Polymer, 2017, V. 131, 56. doi: 10.1016/j.polymer.2017.10.007

9. J.-Y. Jeon, & T.-M. Tak, Journal of Applied Polymer Science, 1996, 62 (5), 763–769. URL: https://archive.org/details/pub_journal-of-applied-polymer-science.

10. M. Zuo, & T. Takeichi, Journal of Polymer Science Part A: Polymer Chemistry, 1997, 35 (17), 3745–3753. doi: 10.1002/(sici)1099-0518(199712)35:17<3745::aid-pola14>3.0.co;2-d.

11. R. M. Gerkin, & B. L. Hilker (2001). Block Copolymers: Segmented. Encyclopedia of Materials: Science and Technology, 2001, 730–732. doi: 10.1016/b0-08-043152-6/00140-6.

12. D. K. Chattopadhyay, K. V. S. N. Raju Structural Engineering of Polyurethane Coatings for High Performance Applications. Prog. Polym. Sci. 2007, 32, P. 352.

13. A. L. Didenko, V. E. Yudin, V. E. Smirnova, I. V. Gofman, E. N. Popova, V. Yu. Elokhovskii, V. M. Svetlichnyi, V. l. V. Kudryavtsev, Journal of International Scientific Publications: Materials, Methods, and Technologies, 2014, V. 8, http://www.scientific-publications.net, https://www.scientific-publications.net/en/article/1000143/.

14. A. Didenko, V. Smirnova, G. Vaganov, E. Popova, V. Elokhovskii, O. Toloshko, E. Vasilyeva, D. Kuznetсov, V. Svetlichnyi, V. Yudin, V. Kudryavtsev Materials, Methods and Technologies, 2018, 12, 144-158. https://www.scientific-publications.net/get/1000030/1536243749619408.pdf Materials, Methods & Technologies, 2018, V. 12. https://www.scientific-publications.net/ru/article/1001690/.

15. Зонненшайн М. Ф. Полиуретаны. Состав, свойства, производство, применение : пер. с англ. яз. / М. Ф. Зонненшайн. – СПб.: Профессия, 2018. – С. 576.

16. A. Didenko, D. Kuznetcov, V. Smirnova, G. Vaganov, A. Ivanov, V. Yudin, V. Kudryavtsev, Nano Hybrids and Composites, 2022, V. 34, P. 23-28. doi: 10.4028/p-rcjpez.

17. A. L. Didenko, D. A. Kuznetcov, V. E. Smirnova, E. A. Bogdanov, G. V. Vaganov, A. G. Ivanov, I. A. Kobykhno, E. S. Vasil’eva, O. V. Tolochko, V. M. Svetlichnyi, V. E. Yudin, V. V. Kudryavtsev. Russian Journal Of Applied Chemistry, 2021, V. 94, # 9, P. 1240-1259. doi: 10.1134/S107042722109007X.

18. A. L. Didenko, D. A. Kuznetcov, V. E. Smirnova, G. V. Vaganov, A. G. Ivanov, E. N. Popova, V. Y. Elokhovskiy, V. M. Svetlichnyi, V. E. Yudin, V. V. Kudryavtsev, Russian Journal Of Applied Chemistry, 2020, V. 93, # 1, P. 45-56. doi: 10.1134/S107042722001005X.

19. A. L. Didenko, D. A. Kuznetcov, V. E. Smirnova, E. N. Popova, G. V. Vaganov, A. G. Ivanov, V. M. Svetlichnyi, V. E. Yudin, V. V. Kudryavtsev, Russian Chemical Bulletin, 2020, 69 (2), 369–377. doi: 10.1007/s11172-020-2769-8.

20. A. L. Didenko, D. A. Kuznetsov, G. V. Vaganov, V. E. Smirnova, E. N. Popova, A. G. Ivanov, V. M. Svetlichnyi, V. E. Yudin, V. V. Kudryavtsev, Polymer Science, Series C, 2020, 62 (2), 90–110. doi: 10.1134/s1811238220020046.

21. A. L. Didenko, D. A. Kuznetcov, G. V. Vaganov, V. E. Smirnova, E. N. Popova, A. G. Ivanov, V. M. Svetlichnyi, V. E. Yudin, V. V. Kudryavtsev, Key Engineering Materials, 2020, 869, 280–295. doi: 10.4028/www.scientific.net/kem.869.280.

22. A. L. Didenko, D. A. Kuznetcov, G. V. Vaganov, V. E. Smirnova, E. N. Popova, V. M. Svetlichnyi, V. E. Yudin, V. V. Kudryavtsev, O. V. Tolochko, E. S. Vasilyeva, Russian Chemical Bulletin, 2019, V. 68, # 8, 1603-1612. doi: 10.1007/s11172-019-2599-8.

23. Холден Г. Термоэластопласты : Перевод с англ. 3-го изд.(Thermoplastic Elastomers) / Г. Холден, Х. Р. Крихедьдорф, Р. П. Куирк ; под ред. Л. Б. Смирнова. – СПб.: Профессия, 2011. – 720 с.