Preview

Plasticheskie massy

Advanced search

Structure formation of a temporarily plasticized matrix of polymer composite materials with adjustable deformability for transformable structures

https://doi.org/10.35164/0554-2901-2020-1-2-8-11

Abstract

It is established that with the selected type and composition of the amino-epoxy copolymer, which is equilibrium swollen in the anhydride-epoxy temporary plasticizer, the decisive role in ensuring the initial elasticity and final deformation heat resistance of such systems plays the formation of the initial polymer network of the primary polymer, which, when combined with a temporary modifier, provides of a minimum low Tg. The additional formation of the network structure of the primary polymer and the network interpenetrating with it, which is formed during the curing of the temporary plasticizer, provides the required Tg of the cured composition as a whole, proportional to the mass fraction of components and the density of the networks. The processes of macrophase separation during curing of a temporary plasticizer and, accordingly, the regulation of the phase morphology of the cured compositions are limited by the formed network of the initial polymer.

About the Authors

E. Y. Trusova
Moscow Aviation Institute (National Research University)
Russian Federation


N. A. Kozlov
Moscow Aviation Institute (National Research University)
Russian Federation


P. G. Babayevsky
Moscow Aviation Institute (National Research University)
Russian Federation


References

1. Хамиц И.И., Филиппов И.М., Бурылов Л.С., Медведев Н.Г., Чернецова А.А., Зарубин В.С., Фельдштейн В.А., Буслов Е.П., Ли А.А., Горбунов Ю.В. Трансформируемые крупногабаритные конструкции для перспективных пилотируемых комплексов // Космическая техника и технологии. 2016. №2(13). С. 23-33.

2. Bernasconi M.C. Going Elsewhere – Adapting Structures for Use in Space through Rigidizing Materials// International Conference On Adaptable Building Structures. Eindhoven [The Netherlands], 03-05 July, 2006.

3. Sarles S., Leo D. Active rigidization of carbon-fiber reinforced polymer composites for ultra-lightweight space structures, Proceedings of the SPIE 6173, 2006.

4. Бабаевский П.Г., Козлов Н.А., Трусова Е.Ю. Однослойный самоужесточающийся в вакууме композиционный материал на основе редкосетчатого поливинилового спирта. Научные труды МАТИ. Вып. 8 (30) – М.: ИЦ МАТИ, 2005, с. 4-8. в)

5. Бабаевский П.Г., Козлов Н.А., Трусова Е.Ю, Солдатова Е.Н. Ужесточающийся однослойный полимерный композиционный материал на основе редкосетчатой эпоксидной матрицы и реакционноспособного пластификатора. Новые материалы и технологии МТМ-2012 Материалы Всероссийской научно-технической конференции. 20-22 ноября 2012 г., с. 104-105.

6. Практикум по полимерному материаловедению. Под ред. Бабаевского П.Г. М.: Химия, 1980. 256 с.

7. Babayevsky, P.G. and Gilham, J.K. Dynamic mechanical analysis of epoxy/aromatic reactions, Journal of Applied Polymer Science, 1973, Vol. 17, pp: 2067-2076.

8. Чалых А.Е., Загайтов А.И, Громов В.В., Коротченко Д.П. Оптический диффузиометр «ОДА-2». Методическое пособие. М.: ИФХ РАН. – 1996. – 34 с.

9. Шиммель Г. Методика электронной микроскопии. – М.: Мир, 1972. – 300 с.

10. Бабаевский П.Г., Козлов Н.А., Трусова Е.Ю, Бобкова А.Д. Влияние молекулярной структуры сетчатого эпоксидного полимера на его набухание во временном пластификаторе. Научные труды МАТИ. Вып. 11 (83) –М.: ИЦ МАТИ, 2006, с. 48-51.

11. Федосеев М.С., Державинская Л.Ф., Стрельников В.Н. Отверждение эпокси-ангидридных композиций в присутствии имидазолов/ Журнал прикладной химии, т. 83, вып. 8, 2010, с. 1303-1307.

12. Ван Кревелен Д.В. Свойства и химическое строение полимеров. Пер. с англ. под ред. А.Я. Малкина. М.: Химия, 1976. 416 с.

13. Бабаевский П.Г., Бухаров С.В. Формирование структуры отверждающихся композиций. М.: МАТИ, 1993. - 100 с.


Review

For citations:


Trusova E.Y., Kozlov N.A., Babayevsky P.G. Structure formation of a temporarily plasticized matrix of polymer composite materials with adjustable deformability for transformable structures. Plasticheskie massy. 2020;(1-2):8-11. (In Russ.) https://doi.org/10.35164/0554-2901-2020-1-2-8-11

Views: 598


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 0554-2901 (Print)