The influence of technological parameters for the production of plasticized polyvinylbutyral films on their optical and physico-mechanical properties
https://doi.org/10.35164/0554-2901-2019-7-8-7-8
Abstract
The effect of pressure, temperature and time during direct pressing on the strength and optical characteristics of adhesive plasticized polyvinyl butyral films is studied. A mathematical analysis of the results of a full factorial experiment is carried out and the regression equations are derived.
About the Authors
M. M. Egorov
JSC V.A. Kargin Polymer Chemistry and Technology Research Institute with a pilot-production plant
Russian Federation
Nizhny Novgorod Region, Dzerzhinsk
Russian Federation
Nizhny Novgorod Region, Dzerzhinsk
V. I. Milov
JSC V.A. Kargin Polymer Chemistry and Technology Research Institute with a pilot-production plant
Russian Federation
Nizhny Novgorod Region, Dzerzhinsk
Russian Federation
Nizhny Novgorod Region, Dzerzhinsk
M. K. Timin
JSC V.A. Kargin Polymer Chemistry and Technology Research Institute with a pilot-production plant
Russian Federation
Nizhny Novgorod Region, Dzerzhinsk
Russian Federation
Nizhny Novgorod Region, Dzerzhinsk
T. P. Mukhina
JSC V.A. Kargin Polymer Chemistry and Technology Research Institute with a pilot-production plant
Russian Federation
Nizhny Novgorod Region, Dzerzhinsk
Russian Federation
Nizhny Novgorod Region, Dzerzhinsk
V. S. Smirnov
JSC V.A. Kargin Polymer Chemistry and Technology Research Institute with a pilot-production plant
Russian Federation
Nizhny Novgorod Region, Dzerzhinsk
Russian Federation
Nizhny Novgorod Region, Dzerzhinsk
O. A. Sivova
JSC V.A. Kargin Polymer Chemistry and Technology Research Institute with a pilot-production plant
Russian Federation
Nizhny Novgorod Region, Dzerzhinsk
Russian Federation
Nizhny Novgorod Region, Dzerzhinsk
E. V. Tabaeva
JSC V.A. Kargin Polymer Chemistry and Technology Research Institute with a pilot-production plant
Russian Federation
Nizhny Novgorod Region, Dzerzhinsk
Russian Federation
Nizhny Novgorod Region, Dzerzhinsk
N. I. Gorbulya
JSC V.A. Kargin Polymer Chemistry and Technology Research Institute with a pilot-production plant
Russian Federation
Nizhny Novgorod Region, Dzerzhinsk
Russian Federation
Nizhny Novgorod Region, Dzerzhinsk
I. I. Kozlova
JSC V.A. Kargin Polymer Chemistry and Technology Research Institute with a pilot-production plant
Russian Federation
Nizhny Novgorod Region, Dzerzhinsk
Russian Federation
Nizhny Novgorod Region, Dzerzhinsk
K. V. Shirshin
JSC V.A. Kargin Polymer Chemistry and Technology Research Institute with a pilot-production plant;
R.E. Alekseev Nizhny Novgorod State Technical University
Russian Federation
Russian Federation
Nizhny Novgorod Region, Dzerzhinsk;
Nizhny Novgorod
References
1. Шварц О., Эбелинг Ф.-В., Фурб Б. Переработка пластмасс. СПб.: Профессия, 2005, с. 168.
2. Грачёв Ю.П, Плаксин. Ю.П. Математические методы планирования экспериментов. М.: ДеЛи принт, 2005. с. 62-78.
3. Дингилевский С.Д. Методика использования MS Excel для расчета уравнений регрессии полного факторного эксперимента при исследовании свойств жидкостекольных смесей. Литье и металлургия 3(67), 2012 с. 267-269.
4. Спормакер Ян Л., Хайдвалер А.Х. 10 примеров для понимания механических свойств полимеров. Полимерные материалы, № 9 (76), 2005, с. 14-18.
Review
For citations:
Egorov M.M., Milov V.I., Timin M.K., Mukhina T.P., Smirnov V.S., Sivova O.A., Tabaeva E.V., Gorbulya N.I., Kozlova I.I., Shirshin K.V. The influence of technological parameters for the production of plasticized polyvinylbutyral films on their optical and physico-mechanical properties. Plasticheskie massy. 2019;(7-8):7-8. (In Russ.) https://doi.org/10.35164/0554-2901-2019-7-8-7-8
Views:
451
Email this article 
