К вопросу о механизме разрушения симметричной границы раздела аморфного полиметилметакрилата, самозалеченной при температуре ниже температуры стеклования объёма
Abstract
Attenuated total reflection Fourier-transformed infrared spectroscopy (ATR-FTIR) has been used for the elucidation of the fracture molecular mechanism of the polymer-polymer interfaces self-healed partially at a temperature ( T ) well below the bulk glass transition temperature ( Tgbulk). For this purpose, the symmetric interface of a carbon-chain polymer such as poly(methyl methacrylate) (PMMA) has been used. It has been found that both the integral intensity and the half-width of the band ν = 1725 cm-1 for the fractured PMMA-PMMA interface self-healed at T = 64оС ( T = Tgbulk - 45оС) are higher as compared to those for the original PMMA surface and for the non-contacted PMMA surface annealed at T = Tgbulk - 45оС. Those differences has been assigned to the chain scission of the interdiffused PMMA chains providing the creation of new chain ends and their following oxidation in the air atmosphere.
About the Authors
Ю. Бойко
Физико-технический институт им. А.Ф. Иоффе Российской академии наук
Russian Federation
Russian Federation
Р. Мамалимов
Физико-технический институт им. А.Ф. Иоффе Российской академии наук
Russian Federation
Russian Federation
References
1. Boiko Yu.M., Prud’homme R.E. Bonding at symmetric polymer/polymer interfaces below the glass transition temperature. Macromolecules 1997, v. 30, p. 3708-3710.
2. Boiko Yu.M. On the scaling law of the evolution of lap-shear strength with healing temperature at amorphous polymer-polymer interfaces and surface glass transition. Colloid Polym. Sci. 2011, v. 289, p. 971-979.
3. Boiko Yu.M. On the molecular mechanism of self-healing of glassy polymers. Colloid Polym. Sci. 2016. v. 294, p. 1237-1242.
4. Boiko Yu.M. On the formation of topological entanglements during the contact of glassy polymers. Colloid Polym. Sci. 2012, v. 290, p. 1201-1206.
5. Zhang M.Q., Rong M.Z. Theoretical consideration and modeling of self-healing polymers. J. Polym. Sci. Part B: Polym. Phys. 2012, v. 50, p. 229-241.
6. Blaiszik B.J., Kramer S.L.B., Olugebefola S.C., Moore J.S., Sottos N.R., White S.R. Self-healing polymers and composites. Annu. Rev. Mater. Res. 2010, v. 40, p. 179-211.
7. Murphy E.B., Wudl F. The world of smart healable materials. Progr. Polym. Sci. 2010, v. 35, p. 223-251.
8. Meyers G.F., DeCoven B.M., Seitz J.T. Is the molecular surface of polystyrene really glassy? Langmuir 1992, v. 8, p. 2330-2335.
9. Mansfield K.F., Theodorou D.N. Molecular dynamics simulation of a glassy polymer surface. Macromolecules 1991, v. 24, p. 6283-6294.
10. Kajiyama T., Tanaka K., Takahara A. Depth dependence of the surface glass transition temperature of a poly(styrene-block-methyl methacrylate) diblock copolymer film on the basis of temperature-dependent X-ray photoelectron spectroscopy. Macromolecules 1995, v. 28, p. 3482-3484.
11. Haward R.N., Young R.J. The Physics of Glassy Polymers, 2nd ed. Chapman and Hall, London (1997).
12. Wool R.P. Polymer interfaces: structure and strength. Hanser Press, Munich (1995).
13. Boiko Yu.M., Mamalimov R.I., Vettegren V.I. Rupture of molecules upon fracture of adhesive joint between two polymer samples. Phys. Solid State 2013, v. 55, p. 1450-1453.
14. Boiko Yu.M., Mamalimov R.I. On the fracture mechanism of partially healed interfaces of glassy polymers: an ATR-FTIR investigation. Colloid Polym. Sci. 2014, v. 292, p. 1003-1007.
15. Boiko Yu.M., Zakrevskii V.A., Pakhotin V.A. Chain scission upon fracture of autoadhesive joints formed from glassy poly(phenylene oxide). J. Adhesion 2014, v. 90, p. 596-606.
16. Smith B. Infrared spectra interpretation. CRC press LLC, NY (1999)
17. Lorec G., Baley C., Sire O., Grohens Y. Characterization of interdiffusion between PVDF and stereoregular PMMA by using ATR-FTIR spectroscopy. Macromol. Symp. 2005, v. 222, p. 265-271.
Review
For citations:
, . Plasticheskie massy. 2018;(1-2):3-5. (In Russ.)
Views:
397
Email this article 
