Determination of the optimal value of the flow coefficient to improve quality improvement of ABS-plastic products produced by FDM-printing method
https://doi.org/10.35164/0554-2901-2025-06-18-20
Abstract
Currently, the processing of polymer composite materials using FDM printing has become widespread in various fields of science and technology, primarily due to the possibility of customization and prototyping of products without the cost of molding tools. In this regard, one of the main requirements for products obtained using additive technologies is dimensional accuracy. Thus, an urgent task is to optimize the technological parameters of the FDM printing process in order to increase the dimensional accuracy of products.
About the Authors
A. Z. Saitgalieva
MIREA – Russian Technological University (MITHT)
Russian Federation
Russian Federation
YU. A. Savitskaya
MIREA – Russian Technological University (MITHT)
Russian Federation
Russian Federation
A. A. Yurkin
MIREA – Russian Technological University (MITHT)
Russian Federation
Russian Federation
К. И. Kharlamova
MIREA – Russian Technological University (MITHT)
Russian Federation
Russian Federation
References
1. Боуэр А. Проект RepRap [сайт]. URL: https://reprap.org (дата обращения: 12.05.2025).
2. Крамп С.С. Method and apparatus for producing parts by selective deposition of a fused thermoplastic material: пат. 4,575,330 США: МПК B29C 67/00; заявл. 1984; опубл. 1986.
3. Portoacă A., Ripeanu R., Diniță A., Tănase M. Optimization of 3D Printing Parameters for Enhanced Surface Quality and Wear Resistance // Polymers. 2023. Vol. 15, N16. P. 3419–3441. DOI: 10.3390/polym15163419.
4. Pivar M., Gregor-Svetec D., Muck D. Effect of Printing Process Parameters on the Shape Transformation Capability of 3D Printed Structures // Polymers. 2021. Vol. 14, N1. P. 117–139. DOI: 10.3390/polym14010117.
5. Mushtaq R., Iqbal A., Wang Y., Rehman M., Petra M. Investigation and Optimization of Effects of 3D Printer Process Parameters on Performance Parameters // Materials. 2023. Vol. 16, N9. P. 3392–3414. DOI: 10.3390/ma16093392.
6. Кондрашов С.В., Пыхтин А.А., Ларионов С.А., Сорокин А.Е. Влияние технологических режимов FDM-печати и состава используемых материалов на физико-механические характеристики FDM-моделей (обзор) // Труды ВИАМ. 2019. №10. С. 34–49.
7. Samykano M., Selvamani S., Kadirgama K., Ngui W., Kanagaraj G., Sudhakar K. Mechanical property of FDM printed ABS: influence of printing parameters // The International Journal of Advanced Manufacturing Technology. 2019. Vol. 102, N9–12. P. 2779–2796. DOI: 10.1007/s00170-019-03313-0.
8. He F., Khan M. Effects of Printing Parameters on the Fatigue Be haviour of 3D-Printed ABS under Dynamic Thermo-Mechanical Loads // Polymers. 2021. Vol. 13, N 14. P. 2362–2384. DOI: 10.3390/polym13142362.
9. Al-Ghamdi K. Sustainable FDM additive manufacturing of ABS components with emphasis on energy minimized and time efficient lightweight construction // International Journal of Lightweight Materials and Manufacture. 2019. Vol. 2, N 4. P. 338–345. DOI: 10.1016/j.ijlmm.2019.07.001.
Review
For citations:
Saitgalieva A.Z., Savitskaya Yu.A., Yurkin A.A., Kharlamova К.И. Determination of the optimal value of the flow coefficient to improve quality improvement of ABS-plastic products produced by FDM-printing method. Plasticheskie massy. 2025;(6):18-20. (In Russ.) https://doi.org/10.35164/0554-2901-2025-06-18-20
Views:
14
Email this article 
