Study of the possibility of increasing the physico-mechanical properties of recycled polymers blends
https://doi.org/10.35164/0554-2901-2025-05-22-26
Abstract
The effect of a compatibilizer – styrene-ethylene-butylene-styrene thermoplastic elastomer – on the compatibility of a mixture of recycled polystyrene and recycled polyethylene is studied to improve its physical and mechanical characteristics. It is shown that the introduction of 2.5 wt.% compatibilizer into the studied polymer blend (50/50 wt.%) improves its complex of physical, mechanical and technological properties.
About the Authors
N. G. Davidyants
Mendeleev University of Chemical Technology of Russia
Russian Federation
Russian Federation
Moscow
I. Yu. Gorbunova
Mendeleev University of Chemical Technology of Russia
Russian Federation
Russian Federation
Moscow
T. P. Kravchenko
Mendeleev University of Chemical Technology of Russia
Russian Federation
Russian Federation
Moscow
T. P. Kravchenko
LLC Polykom
Russian Federation
Russian Federation
Moscow
O. V. Zhilina
Mendeleev University of Chemical Technology of Russia
Russian Federation
Russian Federation
Moscow
N. M. Chalaya
Mendeleev University of Chemical Technology of Russia ; JSC «MIPP-NPO Plastic»
Russian Federation
Russian Federation
Moscow
References
1. Horak Zdenek, Fortelny Ivan, Kolarik Jan, Hlavata Drahomıra, Sikora Antonın. Polymer blends. In book: Encyclopedia of Polymer Science and Technology, // John Wiley & Sons, Inc. 2005. 59 p.
2. Лавров Н.А., Белухичев Е.В. Теоретические основы и механизмы совмещения полимеров // Пластические массы. 2023. №5–6. с. 8–11. DOI:10.35164/0554-2901-2023-5-6-8-11.
3. Каблов В.Ф., Новопольцева О.М. Смеси полимеров. Термодинамика, получение, применение: учебное пособие. ВПИ (филиал) ВолгГТУ. Волжский, 2018. 142 с.
4. Mekhzoum Mohamed El Mehdi, Hanane Benzeid, Rodrigue Denis, Qaiss Abou, Bouhfid Recent Rachid. Advances in Polymer Recycling: A Short Review // Current Organic Synthesis. 2017. N14. PP. 171–185. DOI:10.2174/1570179413666160929095017.
5. Andrea Dorigato. Recycling of polymer blends // Advanced Industrial and Engineering Polymer Research. 2021. N4. PP. 53–60. DOI: 10.1016/j.aiepr.2021.02.005.
6. Валиуллина А.М. Загрязнение окружающей среды полимерными отходами. Методы утилизации полимеров // Научно-практические исследования. 2020. №8/7(31). С. 7–9.
7. Karrer Mahdi Alghazali. Influence of Polymer Blending on Mechanical and Thermal Properties // Modern Applied Science. 2010. N4(9). PP. 157–161. DOI:10.5539/mas.v4n9p157.
8. Shi-Ai Xu, Chi Ming Chan Polystyrene/High Density Polyethylene Blends Compatibilized by a Tri-Block Copolymer I. Properties and Morphology. // Polymer Journal. 1998. N30(7). PP. 552–558. DOI:10.1295/polymj.30.552.
9. Utracki L.A. Compatibilization of Polymer Blends // The Canadian Journal of Chemical Engineering. 2002. Vol. 80. PP. 1008–1016. DOI:10.1002/cjce.5450800601.
10. Dobrovszky Karoly, Ronkay Ferenc. Investigation of compatibilization effects of SEBS-g-MA on polystyrene/polyethylene blend with a novel separation method in melted state // Polymer Bulletin. 2016. N73. PP. 2719–2739. DOI:10.1007/s00289-016-1618-2.
11. Калинчев Э.Л., Саковцева М.Б. Свойства и переработка термопластов: Справочное пособие. – Л.: Химия. 1983. 288 с.
12. Shi Ai Xu, Sie Ching Tjong. Effect of Compatibilizer Content on the Tensile Properties and Fracture Toughness of High Density Polyethylene / Polystyrene Blends // Polymer Journal. 2000. Vol. 32. N3. PP. 208–214. DOI:10.1295/polymj.32.208.
13. Utracki L.A., Wilkie C.A. Polymer Blends Handbook. Second Edition. // Springer Dordrecht. 2014. 2378 p.
Review
For citations:
Davidyants N.G., Gorbunova I.Yu., Kravchenko T.P., Kravchenko T.P., Zhilina O.V., Chalaya N.M. Study of the possibility of increasing the physico-mechanical properties of recycled polymers blends. Plasticheskie massy. 2025;(5):22-26. (In Russ.) https://doi.org/10.35164/0554-2901-2025-05-22-26
Views:
8
Email this article 
