plasticnewsПластические массыPlasticheskie massy0554-2901PLASTMASSY Publishing House (Moscow)10.35164/0554-2901-2020-7-8-28-31plasticnews-543Research ArticleПРИМЕНЕНИЕAPPLICATIONПрименение полианилина и полипиррола в электроникеApplication of polyaniline and polypyrrole in electronicsМежуевЯ. О.MezhuevY. O.valsorja@mail.ruШтильманМ. И.ShtilmanM. I.valsorja@mail.ruКоршакЮ. В.KorshakYu. V.valsorja@mail.ruРоссийский химико-технологический университет им. Д.И. МенделееваРоссияD. Mendeleev University of Chemical Technology of RussiaRussian Federation20201709202007-82831Copyright © Межуев Я.О., Штильман М.И., Коршак Ю.В., 20202020Межуев Я.О., Штильман М.И., Коршак Ю.В.Mezhuev Y.O., Shtilman M.I., Korshak Y.V.Данная работа распространяется под лицензией Creative Commons Attribution 4.0.This work is licensed under a Creative Commons Attribution 4.0 License.https://www.plastics-news.ru/jour/article/view/543

Рассмотрены аспекты применения азотсодержащих полисопряженных систем в электронике. Показано, что применение полианилина и полипиррола в изготовлении конструкционных элементов источников тока и суперконденсаторов имеет существенные перспективы для повышения эффективности функционирования этих устройств. Показана принципиальная возможность применения полианилина в создании электрохромных дисплеев и фотовольтаических элементов

Aspects of application of nitrogen-containing polyconjugated systems in electronics are considered. It is shown that the use of polyaniline and polypyrrole in the manufacture of structural elements of current sources and supercapacitors has significant prospects for increasing the efficiency of these devices. The fundamental possibility of using polyaniline in the creation of electrochromic displays and photovoltaic cells is shown.

полианилинполипирролисточники токасуперконденсаторыэлектроникаpolyanilinepolypyrrolecurrent sourcessupercapacitorselectronicsРабота выполнена при финансовой поддержке Министерства науки и высшего образования Российской Федерации в рамках государственного задания по проекту FSSM-2020-0004.ReferencesWang, H., Lin, J., & Shen, Z.X. (2016). Polyaniline (PANi) based electrode materials for energy storage and conversion. Journal of Science: Advanced Materials and Devices, 1(3), 225–255. doi:10.1016/j.jsamd.2016.08.001.Wang, H., Lin, J., & Shen, Z.X. (2016). Polyaniline (PANi) based electrode materials for energy storage and conversion. Journal of Science: Advanced Materials and Devices, 1(3), 225–255. doi:10.1016/j.jsamd.2016.08.001.Hou, J., Cao, C., Idrees, F., & Ma, X. (2015). Hierarchical Porous Nitrogen-Doped Carbon Nanosheets Derived from Silk for Ultrahigh-Capacity Battery Anodes and Supercapacitors. ACS Nano, 9(3), 2556–2564. doi:10.1021/nn506394r.Hou, J., Cao, C., Idrees, F., & Ma, X. (2015). Hierarchical Porous Nitrogen-Doped Carbon Nanosheets Derived from Silk for Ultrahigh-Capacity Battery Anodes and Supercapacitors. ACS Nano, 9(3), 2556–2564. doi:10.1021/nn506394r.Peng, C., Zhang, S., Jewell, D., & Chen, G. Z. (2008). Carbon nanotube and conducting polymer composites for supercapacitors. Progress in Natural Science, 18(7), 777–788. doi:10.1016/j.pnsc.2008.03.002.Peng, C., Zhang, S., Jewell, D., & Chen, G. Z. (2008). Carbon nanotube and conducting polymer composites for supercapacitors. Progress in Natural Science, 18(7), 777–788. doi:10.1016/j.pnsc.2008.03.002.Lota, G., Fic, K., & Frackowiak, E. (2011). Carbon nanotubes and their composites in electrochemical applications. Energy & Environmental Science, 4(5), 1592. doi:10.1039/c0ee00470g.Lota, G., Fic, K., & Frackowiak, E. (2011). Carbon nanotubes and their composites in electrochemical applications. Energy & Environmental Science, 4(5), 1592. doi:10.1039/c0ee00470g.Le, T.-H., Kim, Y., & Yoon, H. (2017). Electrical and Electrochemical Properties of Conducting Polymers. Polymers, 9(12), 150. doi:10.3390/polym9040150.Le, T.-H., Kim, Y., & Yoon, H. (2017). Electrical and Electrochemical Properties of Conducting Polymers. Polymers, 9(12), 150. doi:10.3390/polym9040150.Zhou, H., Chen, H., Luo, S., Lu, G., Wei, W., & Kuang, Y. (2005). The effect of the polyaniline morphology on the performance of polyaniline supercapacitors. Journal of Solid State Electrochemistry, 9(8), 574–580. doi:10.1007/s10008-004-0594-x.Zhou, H., Chen, H., Luo, S., Lu, G., Wei, W., & Kuang, Y. (2005). The effect of the polyaniline morphology on the performance of polyaniline supercapacitors. Journal of Solid State Electrochemistry, 9(8), 574–580. doi:10.1007/s10008-004-0594-x.Wang, K., Huang, J., & Wei, Z. (2010). Conducting Polyaniline Nanowire Arrays for High Performance Supercapacitors. The Journal of Physical Chemistry C, 114(17), 8062–8067. doi:10.1021/jp9113255.Wang, K., Huang, J., & Wei, Z. (2010). Conducting Polyaniline Nanowire Arrays for High Performance Supercapacitors. The Journal of Physical Chemistry C, 114(17), 8062–8067. doi:10.1021/jp9113255.Mondal, S.K., Barai, K., & Munichandraiah, N. (2007). High capacitance properties of polyaniline by electrochemical deposition on a porous carbon substrate. Electrochimica Acta, 52(9), 3258– 3264. doi:10.1016/j.electacta.2006.09.067.Mondal, S.K., Barai, K., & Munichandraiah, N. (2007). High capacitance properties of polyaniline by electrochemical deposition on a porous carbon substrate. Electrochimica Acta, 52(9), 3258– 3264. doi:10.1016/j.electacta.2006.09.067.Zhang, L. L., & Zhao, X. S. (2009). Carbon-based materials as supercapacitor electrodes. Chemical Society Reviews, 38(9), 2520. doi:10.1039/b813846j.Zhang, L. L., & Zhao, X. S. (2009). Carbon-based materials as supercapacitor electrodes. Chemical Society Reviews, 38(9), 2520. doi:10.1039/b813846j.Xing, W., Zhuo, S., Cui, H., & Yan, Z. (2007). Synthesis of polyaniline-coated ordered mesoporous carbon and its enhanced electrochemical properties. Materials Letters, 61(23-24), 4627–4630. doi:10.1016/j.matlet.2007.02.062.Xing, W., Zhuo, S., Cui, H., & Yan, Z. (2007). Synthesis of polyaniline-coated ordered mesoporous carbon and its enhanced electrochemical properties. Materials Letters, 61(23-24), 4627–4630. doi:10.1016/j.matlet.2007.02.062.Zhang, H., Cao, G., Wang, Z., Yang, Y., Shi, Z., & Gu, Z. (2008). Tube-covering-tube nanostructured polyaniline/carbon nanotube array composite electrode with high capacitance and superior rate performance as well as good cycling stability. Electrochemistry Communications, 10(7), 1056–1059. doi:10.1016/j.elecom.2008.05.007.Zhang, H., Cao, G., Wang, Z., Yang, Y., Shi, Z., & Gu, Z. (2008). Tube-covering-tube nanostructured polyaniline/carbon nanotube array composite electrode with high capacitance and superior rate performance as well as good cycling stability. Electrochemistry Communications, 10(7), 1056–1059. doi:10.1016/j.elecom.2008.05.007.Liu, J., Sun, J., & Gao, L. (2010). A Promising Way To Enhance the Electrochemical Behavior of Flexible Single-Walled Carbon Nanotube/Polyaniline Composite Films. The Journal of Physical Chemistry C, 114(46), 19614–19620. doi:10.1021/jp1092042.Liu, J., Sun, J., & Gao, L. (2010). A Promising Way To Enhance the Electrochemical Behavior of Flexible Single-Walled Carbon Nanotube/Polyaniline Composite Films. The Journal of Physical Chemistry C, 114(46), 19614–19620. doi:10.1021/jp1092042.Guo, F., Mi, H., Zhou, J., Zhao, Z., & Qiu, J. (2015). Hybrid pseudocapacitor materials from polyaniline@multi-walled carbon nanotube with ultrafine nanofiber-assembled network shell. Carbon, 95, 323–329. doi:10.1016/j.carbon.2015.08.052.Guo, F., Mi, H., Zhou, J., Zhao, Z., & Qiu, J. (2015). Hybrid pseudocapacitor materials from polyaniline@multi-walled carbon nanotube with ultrafine nanofiber-assembled network shell. Carbon, 95, 323–329. doi:10.1016/j.carbon.2015.08.052.Yan, J., Wei, T., Shao, B., Fan, Z., Qian, W., Zhang, M., & Wei, F. (2010). Preparation of a graphene nanosheet/polyaniline composite with high specific capacitance. Carbon, 48(2), 487–493. doi:10.1016/j.carbon.2009.09.066.Yan, J., Wei, T., Shao, B., Fan, Z., Qian, W., Zhang, M., & Wei, F. (2010). Preparation of a graphene nanosheet/polyaniline composite with high specific capacitance. Carbon, 48(2), 487–493. doi:10.1016/j.carbon.2009.09.066.Wang, H., Hao, Q., Yang, X., Lu, L., & Wang, X. (2009). Graphene oxide doped polyaniline for supercapacitors. Electrochemistry Communications, 11(6), 1158–1161. doi:10.1016/j.elecom.2009.03.036.Wang, H., Hao, Q., Yang, X., Lu, L., & Wang, X. (2009). Graphene oxide doped polyaniline for supercapacitors. Electrochemistry Communications, 11(6), 1158–1161. doi:10.1016/j.elecom.2009.03.036.Lu, X.-F., Chen, X.-Y., Zhou, W., Tong, Y.-X., & Li, G.-R. (2015). α-Fe2O3@PANI Core–Shell Nanowire Arrays as Negative Electrodes for Asymmetric Supercapacitors. ACS Applied Materials& Interfaces, 7(27), 14843–14850. doi:10.1021/acsami.5b03126.Lu, X.-F., Chen, X.-Y., Zhou, W., Tong, Y.-X., & Li, G.-R. (2015). α-Fe2O3@PANI Core–Shell Nanowire Arrays as Negative Electrodes for Asymmetric Supercapacitors. ACS Applied Materials& Interfaces, 7(27), 14843–14850. doi:10.1021/acsami.5b03126.Yan, J., Wei, T., Qiao, W., Fan, Z., Zhang, L., Li, T., & Zhao, Q. (2010). A high-performance carbon derived from polyaniline for supercapacitors. Electrochemistry Communications, 12(10), 1279–1282. doi:10.1016/j.elecom.2010.06.037.Yan, J., Wei, T., Qiao, W., Fan, Z., Zhang, L., Li, T., & Zhao, Q. (2010). A high-performance carbon derived from polyaniline for supercapacitors. Electrochemistry Communications, 12(10), 1279–1282. doi:10.1016/j.elecom.2010.06.037.Fan, L.-Z., & Maier, J. (2006). High-performance polypyrrole electrode materials for redox supercapacitors. Electrochemistry Communications, 8(6), 937–940. doi:10.1016/j.elecom.2006.03.035 .Fan, L.-Z., & Maier, J. (2006). High-performance polypyrrole electrode materials for redox supercapacitors. Electrochemistry Communications, 8(6), 937–940. doi:10.1016/j.elecom.2006.03.035 .Wang, D., Wang, X., Yang, X., Yu, R., Ge, L., & Shu, H. (2015). Polyaniline modification and performance enhancement of lithium-rich cathode material based on layered-spinel hybrid structure. Journal of Power Sources, 293, 89–94. doi:10.1016/j.jpowsour.2015.05.058.Wang, D., Wang, X., Yang, X., Yu, R., Ge, L., & Shu, H. (2015). Polyaniline modification and performance enhancement of lithium-rich cathode material based on layered-spinel hybrid structure. Journal of Power Sources, 293, 89–94. doi:10.1016/j.jpowsour.2015.05.058.Lai, C., Zhang, H.Z., Li, G. R., & Gao, X. P. (2011). Mesoporous polyaniline/TiO2 microspheres with core–shell structure as anode materials for lithium ion battery. Journal of Power Sources, 196(10), 4735–4740. doi:10.1016/j.jpowsour.2011.01.077.Lai, C., Zhang, H.Z., Li, G. R., & Gao, X. P. (2011). Mesoporous polyaniline/TiO2 microspheres with core–shell structure as anode materials for lithium ion battery. Journal of Power Sources, 196(10), 4735–4740. doi:10.1016/j.jpowsour.2011.01.077.Ferchichi, K., Hbaieb, S., Amdouni, N., Pralong, V., & Chevalier, Y. (2014). Pickering emulsion polymerization of polyaniline/LiCoO2 nanoparticles used as cathode materials for lithium batteries. Ionics, 20(9), 1301–1314. doi:10.1007/s11581-014-1074-7.Ferchichi, K., Hbaieb, S., Amdouni, N., Pralong, V., & Chevalier, Y. (2014). Pickering emulsion polymerization of polyaniline/LiCoO2 nanoparticles used as cathode materials for lithium batteries. Ionics, 20(9), 1301–1314. doi:10.1007/s11581-014-1074-7.Chen, W.-M., Huang, Y.-H., & Yuan, L.-X. (2011). Self-assembly LiFePO4/polyaniline composite cathode materials with inorganic acids as dopants for lithium-ion batteries. Journal of Electroanalytical Chemistry, 660(1), 108–113. doi:10.1016/j.jelechem. 2011.06.013.Chen, W.-M., Huang, Y.-H., & Yuan, L.-X. (2011). Self-assembly LiFePO4/polyaniline composite cathode materials with inorganic acids as dopants for lithium-ion batteries. Journal of Electroanalytical Chemistry, 660(1), 108–113. doi:10.1016/j.jelechem. 2011.06.013.Gong, C., Deng, F., Tsui, C.-P., Xue, Z., Ye, Y. S., Tang, C.-Y., Zhou, X., Xie, X. (2014). PANI–PEG copolymer modified LiFePO4 as a cathode material for high-performance lithium ion batteries. J. Mater. Chem. A, 2(45), 19315–19323. doi:10.1039/c4ta04089a.Gong, C., Deng, F., Tsui, C.-P., Xue, Z., Ye, Y. S., Tang, C.-Y., Zhou, X., Xie, X. (2014). PANI–PEG copolymer modified LiFePO4 as a cathode material for high-performance lithium ion batteries. J. Mater. Chem. A, 2(45), 19315–19323. doi:10.1039/c4ta04089a.Cao, J., Hu, G., Peng, Z., Du, K., & Cao, Y. (2015). Polypyrrole-coated LiCoO2 nanocomposite with enhanced electrochemical properties at high voltage for lithium-ion batteries. Journal of Power Sources, 281, 49–55. doi:10.1016/j.jpowsour.2015.01.174.Cao, J., Hu, G., Peng, Z., Du, K., & Cao, Y. (2015). Polypyrrole-coated LiCoO2 nanocomposite with enhanced electrochemical properties at high voltage for lithium-ion batteries. Journal of Power Sources, 281, 49–55. doi:10.1016/j.jpowsour.2015.01.174.Zhang, Z., Wang, J., Chou, S., Liu, H., Ozawa, K. & Li, H. (2013). Polypyrrole-coated α-LiFeO2 nanocomposite with enhanced electrochemical properties for lithium-ion batteries . Electrochimica Acta, 108, 820826.Zhang, Z., Wang, J., Chou, S., Liu, H., Ozawa, K. & Li, H. (2013). Polypyrrole-coated α-LiFeO2 nanocomposite with enhanced electrochemical properties for lithium-ion batteries . Electrochimica Acta, 108, 820826.Goriparti, S., Miele, E., De Angelis, F., Di Fabrizio, E., Proietti Zaccaria, R., & Capiglia, C. (2014). Review on recent progress of nanostructured anode materials for Li-ion batteries. Journal of Power Sources, 257, 421–443. doi:10.1016/j.jpowsour.2013.11.103.Goriparti, S., Miele, E., De Angelis, F., Di Fabrizio, E., Proietti Zaccaria, R., & Capiglia, C. (2014). Review on recent progress of nanostructured anode materials for Li-ion batteries. Journal of Power Sources, 257, 421–443. doi:10.1016/j.jpowsour.2013.11.103.Lai, C., Zhang, H. Z., Li, G. R., & Gao, X. P. (2011). Mesoporous polyaniline/TiO2 microspheres with core–shell structure as anode materials for lithium ion battery. Journal of Power Sources, 196(10), 4735–4740. doi:10.1016/j.jpowsour.2011.01.077.Lai, C., Zhang, H. Z., Li, G. R., & Gao, X. P. (2011). Mesoporous polyaniline/TiO2 microspheres with core–shell structure as anode materials for lithium ion battery. Journal of Power Sources, 196(10), 4735–4740. doi:10.1016/j.jpowsour.2011.01.077.Cao, Y., Xiao, L., Sushko, M. L., Wang, W., Schwenzer, B., Xiao, J., Nie, Z., Saraf, L.V., Yang, Z., Liu, J. (2012). Sodium Ion Insertion in Hollow Carbon Nanowires for Battery Applications. Nano Letters, 12(7), 3783–3787. doi:10.1021/nl3016957.Cao, Y., Xiao, L., Sushko, M. L., Wang, W., Schwenzer, B., Xiao, J., Nie, Z., Saraf, L.V., Yang, Z., Liu, J. (2012). Sodium Ion Insertion in Hollow Carbon Nanowires for Battery Applications. Nano Letters, 12(7), 3783–3787. doi:10.1021/nl3016957.Chen, J., Liu, Y., Li, W., Wu, C., Xu, L., & Yang, H. (2015). Nanostructured polystyrene/polyaniline/graphene hybrid materials for electrochemical supercapacitor and Na-ion battery applications. Journal of Materials Science, 50(16), 5466–5474. doi:10.1007/s10853-015-9092-z.Chen, J., Liu, Y., Li, W., Wu, C., Xu, L., & Yang, H. (2015). Nanostructured polystyrene/polyaniline/graphene hybrid materials for electrochemical supercapacitor and Na-ion battery applications. Journal of Materials Science, 50(16), 5466–5474. doi:10.1007/s10853-015-9092-z.Xiao, L., Cao, Y., Xiao, J., Schwenzer, B., Engelhard, M.H., Saraf, L.V., Nie, Z., Exarhos, G.J., Liu, J. (2012). A Soft Approach to Encapsulate Sulfur: Polyaniline Nanotubes for Lithium-Sulfur Batteries with Long Cycle Life. Advanced Materials, 24(9), 1176– 1181. doi:10.1002/adma.201103392.Xiao, L., Cao, Y., Xiao, J., Schwenzer, B., Engelhard, M.H., Saraf, L.V., Nie, Z., Exarhos, G.J., Liu, J. (2012). A Soft Approach to Encapsulate Sulfur: Polyaniline Nanotubes for Lithium-Sulfur Batteries with Long Cycle Life. Advanced Materials, 24(9), 1176– 1181. doi:10.1002/adma.201103392.Goto, F., Abe, K., Ikabayashi, K., Yoshida, T., & Morimoto, H. (1987). The polyaniline/lithium battery. Journal of Power Sources, 20(3-4), 243–248. doi:10.1016/0378-7753(87)80118-0.Goto, F., Abe, K., Ikabayashi, K., Yoshida, T., & Morimoto, H. (1987). The polyaniline/lithium battery. Journal of Power Sources, 20(3-4), 243–248. doi:10.1016/0378-7753(87)80118-0.Li, R., Lixin, W., Haoyuan, A., & Fuqiang, Z. (2007). Study of lithium/polypyrrole secondary batteries with Lithium as cathode and polypyrrole anode. Rare Metals, 26(6), 591–600. doi:10.1016/s1001-0521(08)60012-1.Li, R., Lixin, W., Haoyuan, A., & Fuqiang, Z. (2007). Study of lithium/polypyrrole secondary batteries with Lithium as cathode and polypyrrole anode. Rare Metals, 26(6), 591–600. doi:10.1016/s1001-0521(08)60012-1.Shi, H.-Y., Ye, Y.-J., Liu, K., Song, Y., & Sun, X. (2018). A Long Cycle-Life Self-Doped Polyaniline Cathode for Rechargeable Aqueous Zinc Batteries. Angewandte Chemie International Edition. doi:10.1002/anie.201808886.Shi, H.-Y., Ye, Y.-J., Liu, K., Song, Y., & Sun, X. (2018). A Long Cycle-Life Self-Doped Polyaniline Cathode for Rechargeable Aqueous Zinc Batteries. Angewandte Chemie International Edition. doi:10.1002/anie.201808886.Barnes, A., Despotakis, A., Wong, T. C. P., Anderson, A. P., Chambers, B., & Wright, P. V. (1998). Towards a "smart window" for microwave applications. Smart Materials and Structures, 7(6), 752–758. doi:10.1088/0964-1726/7/6/003.Barnes, A., Despotakis, A., Wong, T. C. P., Anderson, A. P., Chambers, B., & Wright, P. V. (1998). Towards a "smart window" for microwave applications. Smart Materials and Structures, 7(6), 752–758. doi:10.1088/0964-1726/7/6/003.Pagès, H., Topart, P., & Lemordant, D. (2001). Wide band electrochromic displays based on thin conducting polymer films. Electrochimica Acta, 46(1314), 2137–2143. doi:10.1016/s00134686(01)00392-9.Pagès, H., Topart, P., & Lemordant, D. (2001). Wide band electrochromic displays based on thin conducting polymer films. Electrochimica Acta, 46(1314), 2137–2143. doi:10.1016/s00134686(01)00392-9.Katore, M. S., Nemade, K. R., Yawale, S. S., & Yawale, S. P. (2016). Photovoltaic application of architecture ITO/graphene oxide–polyaniline/aluminum. Journal of Materials Science: Materials in Electronics, 27(9), 9828–9835. doi:10.1007/s10854-016-5049-5.Katore, M. S., Nemade, K. R., Yawale, S. S., & Yawale, S. P. (2016). Photovoltaic application of architecture ITO/graphene oxide–polyaniline/aluminum. Journal of Materials Science: Materials in Electronics, 27(9), 9828–9835. doi:10.1007/s10854-016-5049-5.Tan, S., Zhai, J., Xue, B., Wan, M., Meng, Q., Li, Y., Jiang, L., Zhu, D. (2004). Property Influence of Polyanilines on Photovoltaic Behaviors of Dye-Sensitized Solar Cells. Langmuir, 20(7), 2934– 2937. doi:10.1021/la036260m.Tan, S., Zhai, J., Xue, B., Wan, M., Meng, Q., Li, Y., Jiang, L., Zhu, D. (2004). Property Influence of Polyanilines on Photovoltaic Behaviors of Dye-Sensitized Solar Cells. Langmuir, 20(7), 2934– 2937. doi:10.1021/la036260m.Bejbouji, H., Vignau, L., Miane, J.L., Dang, M.-T., Oualim, E.M., Harmouchi, M., & Mouhsen, A. (2010). Polyaniline as a hole injection layer on organic photovoltaic cells. Solar Energy Materials and Solar Cells, 94(2), 176–181. doi:10.1016/j.solmat.2009.08.018.Bejbouji, H., Vignau, L., Miane, J.L., Dang, M.-T., Oualim, E.M., Harmouchi, M., & Mouhsen, A. (2010). Polyaniline as a hole injection layer on organic photovoltaic cells. Solar Energy Materials and Solar Cells, 94(2), 176–181. doi:10.1016/j.solmat.2009.08.018.Nemade, K., Dudhe, P., & Tekade, P. (2018). Enhancement of photovoltaic performance of polyaniline/graphene composite-based dye-sensitized solar cells by adding TiO2 nanoparticles. Solid State Sciences, 83, 99–106. doi:10.1016/j.solidstatesciences.2018.07.009.Nemade, K., Dudhe, P., & Tekade, P. (2018). Enhancement of photovoltaic performance of polyaniline/graphene composite-based dye-sensitized solar cells by adding TiO2 nanoparticles. Solid State Sciences, 83, 99–106. doi:10.1016/j.solidstatesciences.2018.07.009.Sangiorgi, N., & Sanson, A. (2017). Influence of electropolymerized polypyrrole optical properties on bifacial Dye-Sensitized Solar Cells. Polymer, 125, 208–216. doi:10.1016/j.polymer.2017.08.014.Sangiorgi, N., & Sanson, A. (2017). Influence of electropolymerized polypyrrole optical properties on bifacial Dye-Sensitized Solar Cells. Polymer, 125, 208–216. doi:10.1016/j.polymer.2017.08.014.Scrosati, B. (1991). Conducting Polymers and Their Applications. Materials Science Forum, 42, 207–220. doi:10.4028/www.scientific.net/msf.42.207.Scrosati, B. (1991). Conducting Polymers and Their Applications. Materials Science Forum, 42, 207–220. doi:10.4028/www.scientific.net/msf.42.207.Das, T.K., & Prusty, S. (2012). Review on Conducting Polymers and Their Applications. Polymer-Plastics Technology and Engineering, 51(14), 1487–1500. doi:10.1080/03602559.2012.710697.Das, T.K., & Prusty, S. (2012). Review on Conducting Polymers and Their Applications. Polymer-Plastics Technology and Engineering, 51(14), 1487–1500. doi:10.1080/03602559.2012.710697.Zhan, C., Yu, G., Lu, Y., Wang, L., Wujcik, E., & Wei, S. (2017). Conductive polymer nanocomposites: a critical review of modern advanced devices. Journal of Materials Chemistry C, 5(7), 1569–1585. doi:10.1039/c6tc04269d.Zhan, C., Yu, G., Lu, Y., Wang, L., Wujcik, E., & Wei, S. (2017). Conductive polymer nanocomposites: a critical review of modern advanced devices. Journal of Materials Chemistry C, 5(7), 1569–1585. doi:10.1039/c6tc04269d.Simotwo, S.K., & Kalra, V. (2016). Polyaniline-based electrodes: recent application in supercapacitors and next generation rechargeable batteries. Current Opinion in Chemical Engineering, 13, 150– 160. doi:10.1016/j.coche.2016.09.001.Simotwo, S.K., & Kalra, V. (2016). Polyaniline-based electrodes: recent application in supercapacitors and next generation rechargeable batteries. Current Opinion in Chemical Engineering, 13, 150– 160. doi:10.1016/j.coche.2016.09.001.Luo, Y., Guo, R., Li, T., Li, F., Liu, Z., Zheng, M., Wang, B., Yang, Z., Luo, H., Wan, Y. (2018). Applications of polyaniline for Li-ion batteries, Li-sulfur batteries and supercapacitors. ChemSusChem. doi:10.1002/cssc.201802186.Luo, Y., Guo, R., Li, T., Li, F., Liu, Z., Zheng, M., Wang, B., Yang, Z., Luo, H., Wan, Y. (2018). Applications of polyaniline for Li-ion batteries, Li-sulfur batteries and supercapacitors. ChemSusChem. doi:10.1002/cssc.201802186.

The authors declare that there are no conflicts of interest present.